Chemi Tech Defoamer for PCB Board Cleaning Agents: Efficiently Solve Foam Problems

In the production and cleaning process of PCB boards, the foam problem caused by cleaning agents has always been a major challenge for enterprises. Excessive foam not only affects the cleaning efficiency, leading to incomplete cleaning, but also causes waste of cleaning agents and increases production costs. Moreover, the overflow of foam can pollute the production environment and affect the health of operators.

Chemi Tech's defoamer for PCB board cleaning agents is developed to solve these problems. It has the characteristics of rapid defoaming and long - lasting foam suppression. It can eliminate a large amount of foam in the cleaning agent in a short time and continuously suppress the generation of foam throughout the cleaning process.

The specific steps for using Chemi Tech defoamer are as follows:

First, determine the amount of defoamer to be added according to the usage of the cleaning agent and the degree of foam generation. Generally, the addition amount is 0.1% - 0.5% of the total amount of the cleaning agent.

Then, during the process of stirring the cleaning agent, slowly add the defoamer into the cleaning agent to ensure that the defoamer can be evenly dispersed in the cleaning agent.

Finally, continue to stir for a period of time to allow the defoamer to fully play its role.

An electronics manufacturing enterprise was constantly troubled by the foam problem during the PCB board cleaning process. The traditional defoamer had poor effects, resulting in low cleaning efficiency and high production costs. After trying Chemi Tech's defoamer for PCB board cleaning agents, the situation was significantly improved. The foam was quickly eliminated, the cleaning effect was significantly enhanced, the usage of the cleaning agent was reduced by 20%, and the production cost was greatly reduced. At the same time, the production environment was also improved, and the comfort of the operators' work was enhanced.

Chemi Tech's defoamer for PCB board cleaning agents is the ideal choice to solve the foam problem in PCB board cleaning.