Product Introduction | Chemi Tech Chemical focuses on the research and production of wetting agents.Our wetting agents can significantly reduce the surface tension of liquids (up to a minimum of 20mN/m),improve the wetting performance of various substrates,and are widely used in industries such as concrete admixtures,industrial coatings,printing inks,and substrate pretreatment. |
🟨 Wetting agents for building materials, coatings, inks, and substrates
1. Wetting agents for building materials
Technical characteristics: resistant to strong alkalinity (stable under pH 13 conditions); Significantly reduce the surface tension of concrete pore fluid; Good synergy with water reducing agents, no air entrainment
Recommended model: KMB-3101 (universal type): dosage 0.1-0.3%; KMB-3102 (efficient type): dosage 0.05-0.15%
2. Wetting agents for coatings
Technical features: Fast dynamic wetting speed (≤ 5 seconds); Does not affect the gloss and adhesion of the coating; Can eliminate defects such as shrinkage and fisheye
Recommended model: KMB-3201 (for water-based systems); KMB-3202 (for solvent based systems)
3. Wetting agent for ink
Technical characteristics: ultra-low surface tension (≤ 20mN/m); Improve pigment dispersion stability; Does not affect the ink drying speed
Recommended model: KMB-3301 (for offset printing ink); KMB-3302 (for gravure ink)
4. Wetting agent for substrate
Technical features: rapid penetration of porous substrates; Enhance the adhesion of subsequent coatings; Does not contain volatile organic compounds
Recommended model: KMB-3401 (metal substrate treatment); KMB-3402 (plastic substrate treatment)
Case Background
A coatings manufacturer in Jiangsu faced cratering defects in water-based industrial paints applied on galvanized steel surfaces, with a defect rate of 12%.
Chemi Tech Solution
Product Used: KMB-3201 Wetting Agent
Implementation:
Added 0.2% KMB-3201 Wetting Agent.
Adjusted application viscosity to 60-80 KU.
Controlled spraying environment humidity to ≤70%.
Results:
Cratering defects completely eliminated.
Adhesion improved by one grade (achieving Grade 1 compliance).
Annual rework losses reduced by approximately RMB 850,000.
Client Testimonial
"Chemi Tech’s wetting agent resolved our long-standing coating challenges on galvanized steel. The first-pass yield surged from 88% to 99.5%, transforming production efficiency."
— Mr. Feng, Technical Director, Jiangsu Industrial Coatings Manufacturer
Please consult customer service for product usage instructions and storage precautions.
Guangzhou Chemi Tech New Material Co., Ltd.
Address : No. 3 Road, Lanshan Village, Xiancun Town, Zengcheng District, Guangzhou City
Contact : +86-19820415595(Manager Fang)
Tel : +86-13414362583(Manager Lee)
E-mail : crystal@gzchemitech.com