1. High solid content;

2. Good leveling ability;

3. Excellent wear resistance;

4. Strong adhesion, good flexibility, high strength, and strong impact resistance;

5. Has the properties of solvent resistance and chemical corrosion resistance;

Case Background
The client, an automotive parts manufacturer in East China, had workshop floors originally made of ordinary cement. Long-term exposure to heavy machinery loads, frequent forklift traffic, and oil corrosion caused severe dusting, cracking, and stain penetration. These issues not only reduced production efficiency but also created safety hazards. Key requirements included:

• High wear/impact resistance for heavy equipment operations

• Oil/chemical resistance with easy cleaning and maintenance

• Enhanced aesthetics meeting modern factory standards

• 
  

Chemi Tech Solution
After an on-site assessment, Chemi Tech’s technical team customized an integrated "Epoxy Mortar Flooring + Polyurethane Topcoat" solution:

1. Substrate Preparation:

   • Grinding existing surface

   • Crack repair

   • Thorough oil contamination removal

2. Epoxy Mortar Mid-coat:

   • Applied KMX-102 epoxy intermediate coat

   • Filled/reinforced base layer

   • Compressive strength ≥80MPa

3. Epoxy Topcoat:

   • Roller-applied KMX-105 abrasion-resistant epoxy topcoat (1.2mm thickness)

   • Formed dense anti-corrosion layer

4. Polyurethane Sealer:

   • Added Chemi Tech polyurethane glazing varnish

   • Enhanced oil resistance and gloss retention

Results:

• Wear Resistance: Zero scratches after 6 months; no tire marks from forklifts

• Easy Maintenance: Spilled oil/chemicals wiped clean instantly; cleaning efficiency ↑60%

• Cost Savings: Service life extended by 3+ years vs alternatives; annual maintenance costs ↓35%

"Chemi Tech’s epoxy flooring far exceeded our expectations! Their professional team delivered flawless installation. The new floor isn’t just visually impressive – it permanently resolved chronic dusting and oil contamination issues. Our workshop environment is completely revitalized, with international clients praising its German-factory-grade standards during visits."
— Mr. Zhang, Project Leader

usage method:

1. Before mixing, mix the main paint thoroughly and evenly. Pour the main paint and curing agent into the mixing bucket according to the proportion and mix evenly before construction. Please use the mixture within 1 hour.

2. Bottom coat: epoxy primer or sealing primer, with a reference dosage of about 0.15Kg/m ², which should be determined according to the on-site substrate conditions to achieve uniform film formation;

3. Intermediate coating: Depending on the flatness and strength of the substrate, apply quartz powder (or quartz sand) mixed with epoxy intermediate coating to the desired thickness;

4. Topcoat: Roll the high bonding epoxy floor topcoat mixture onto the sealed primer or intermediate coat.

Product storage:

Sealed storage in a cool and dry place, with a shelf life of 12 months. If it exceeds the shelf life and passes inspection, it can still be used.