In industrial production, the use of strong-acid polishing liquid is extremely common; however, the foam problem has always been a major challenge for many manufacturing enterprises. When the strong-acid polishing liquid produces large amounts of foam, it not only affects the polishing effect, causing defects on the product surface and reducing product quality, but also greatly reduces production efficiency and increases production costs. In addition, excessive foam overflow may corrode production equipment and shorten its service life.
As a professional defoamer supplier, Chemi Tech has developed a high-performance strong-acid polishing liquid defoamer targeting the foam problem of strong-acid polishing liquid. This defoamer has the following notable advantages:
First, it has rapid defoaming and long-lasting foam inhibition capabilities. It can eliminate foam that has already formed within a short time and prevent foam from reappearing for a relatively long period, ensuring the smooth progress of the production process.
Second, it has strong chemical stability. It can maintain stable performance in a strong-acid environment without chemically reacting with other components in the strong-acid polishing liquid, ensuring the quality and stability of the product.
Third, it has good compatibility. It blends perfectly with the strong-acid polishing liquid without layering, sedimentation, or similar phenomena, and does not affect the original performance of the polishing liquid.
The steps for using Chemi Tech's strong-acid polishing liquid defoamer are very simple:
Step one, determine the dosage of the defoamer based on the degree of foam generated during production. Generally speaking, the dosage is 0.1% - 0.3% of the total amount of polishing liquid.
Step two, while stirring the strong-acid polishing liquid, slowly add the defoamer to the liquid, ensuring the defoamer is evenly dispersed.
Step three, continue stirring for a period of time so that the defoamer can fully take effect.
Below is a real-world case for you. An enterprise engaged in metal polishing had its production seriously affected by the foam problem when using strong-acid polishing liquid. They tried many methods, but the results were not ideal. Later, the enterprise adopted Chemi Tech's strong-acid polishing liquid defoamer, and after operating according to the above steps, the foam problem was completely solved. The polishing quality of the products improved significantly, production efficiency increased by 30%, and production costs were also reduced.
With its excellent performance and reliable results, Chemi Tech's strong-acid polishing liquid defoamer provides a perfect solution to foam problems in industrial production.