During slaughtering production, large amounts of stubborn foam are easily generated within the wastewater discharge system. This foam not only overflows the tanks and causes trouble in the on-site environment, but also seriously hinders the progress of subsequent treatment processes, reducing equipment treatment capacity and even creating a risk of system shutdown, directly affecting the pace of continuous production and overall cost control.
Faced with this common industry pain point, Chemi Tech, drawing on in-depth application research, has introduced a highly targeted series of slaughterhouse wastewater defoaming products. Our solution is not a simple addition, but is based on precise analysis of the causes of foam. Slaughterhouse wastewater has a complex composition, rich in grease, proteins, and surface-active substances, and stable, long-lasting foam easily forms during stirring, aeration, and other stages.
Our solution steps are clear and well defined: first, our technical engineers conduct an on-site survey and analyze wastewater samples to assess the characteristics and severity of the foam. Then, according to the specific situation, we recommend a matching Chemi Tech defoamer model; this product series features rapid penetration and long-lasting foam suppression and can effectively handle complex water bodies with high temperature, high alkalinity, and high organic content. Next, we provide a detailed plan for dosing points and dosage control, and it is usually recommended to dose at the source areas where foam is generated, such as aeration tanks and equalization tanks, so as to achieve the best effect with the minimum dosage. Finally, we provide ongoing follow-up service to ensure the defoaming effect remains stable over the long term.
In an application at a large meat processing enterprise in East China, foam problems at its wastewater treatment station caused inaccurate readings from online monitoring instruments and low treatment efficiency. After adopting Chemi Tech's customized solution, the foam was significantly controlled on the very day of dosing, the liquid surface became clear again, the monitoring equipment returned to normal operation, the efficiency of the subsequent biochemical treatment unit increased by about 30%, and the system returned to a stable track, with the customer expressing high approval of the results.
Choosing Chemi Tech means choosing a complete support system that ranges from problem diagnosis to long-term treatment. Through professional products and technical services, we are committed to helping customers clear away foam obstacles in their production processes, ensure the smooth operation of their wastewater systems, and safeguard stable and efficient production.