In the cleaning of aluminum parts, foaming has long been a major problem for many enterprises. Excessive foam not only reduces cleaning efficiency, lengthens cleaning time and increases production costs, but can also overflow the cleaning equipment, leaving slippery workshop floors and creating safety hazards. At the same time, foam can also reduce the cleaning effect of the cleaner on aluminum parts, leaving dirt residues on the surface and lowering product quality. This series of problems has become a market pain point for the aluminum parts cleaning industry.
The Chemi Tech defoamer for aluminum parts cleaners is an efficient solution developed specifically for these problems. Featuring rapid defoaming and long-lasting foam suppression, it can quickly eliminate the large amount of foam generated in the cleaner and prevent foam from regenerating throughout the entire cleaning process.
Using the Chemi Tech defoamer for aluminum parts cleaners is very simple. First, based on the capacity of the cleaning equipment and the amount of cleaner used, add the defoamer to the cleaner in a certain proportion. Generally, the dosage is 0.1% - 0.5% of the total cleaner, and the exact ratio can be adjusted according to actual foaming conditions. Then stir thoroughly so that the defoamer mixes fully with the cleaner. Finally, use the prepared cleaner for aluminum parts cleaning, and a clear defoaming effect will be visible.
Here is a real-world case to share. An enterprise engaged in aluminum parts processing used a conventional cleaner and suffered from severe foaming, low cleaning efficiency and affected product quality. After trying the Chemi Tech defoamer for aluminum parts cleaners, the situation improved markedly. The foam disappeared quickly, cleaning time was shortened by 30%, the cleanliness of the aluminum parts surfaces improved noticeably, and the product defect rate dropped by 20%. Production costs fell, and both production efficiency and product quality improved.
With its outstanding performance, the Chemi Tech defoamer for aluminum parts cleaners solves the foaming challenge for the aluminum parts cleaning industry and is an ideal choice for enterprises seeking to improve production efficiency and product quality.