In the chemical polishing process, the generation of foam is a common and troublesome problem. Too much foam not only reduces polishing efficiency but can also affect polishing quality, causing defects on the product surface and increasing production costs. This is the market pain point that many companies face in the chemical polishing stage.
Chemi Tech chemical polishing defoamer was developed precisely to solve this problem. It features fast defoaming and lasting foam suppression, and can eliminate foam in the chemical polishing bath within a short time while continuously suppressing foam generation throughout the polishing process.
The specific steps for using Chemi Tech chemical polishing defoamer are as follows:
First, determine the dosage of the defoamer according to the amount of chemical polishing bath used and the degree of foam generation. Generally, the dosage is 0.1% - 0.5% of the total polishing bath.
Then, while stirring the chemical polishing bath, slowly add the defoamer to the bath to ensure it disperses evenly in the polishing liquid.
Finally, continue stirring for a period of time so that the defoamer can fully take effect.
Here is a practical case. A company engaged in metal product processing had long been troubled by foam in its chemical polishing process. It tried many methods, but the results were unsatisfactory. Later, the company introduced Chemi Tech chemical polishing defoamer. After using it as described above, the foam problem improved significantly. Polishing efficiency rose greatly, the surface quality of the products was improved, and production costs were reduced accordingly.
With its excellent performance and good results, Chemi Tech chemical polishing defoamer provides a reliable foam solution for the chemical polishing industry.