Chemi Tech Nitric-Acid-Resistant Defoamer: Solving Foam Problems in Nitric Acid Systems

In chemical production, nitric acid systems are extremely common. However, the foam they generate brings many troubles to production. Excessive foam causes a falsely high liquid level in the reactor, affects precise control of the reaction, lowers production efficiency and increases production costs. Foam overflow can also cause equipment corrosion and environmental pollution. These problems have become the market pain point for chemical companies applying nitric acid systems.

Chemi Tech nitric-acid-resistant defoamer was developed to solve these pain points. It has excellent resistance to nitric acid and can defoam quickly and suppress foam durably in strongly acidic environments. The specific steps for using Chemi Tech nitric-acid-resistant defoamer are as follows:

Step one, determine the dosage of the defoamer according to the production process and the foam situation. Generally, the initial dosage can be controlled between 0.1% and 0.3%.

Step two, slowly add the defoamer to the nitric acid system. During addition, stir thoroughly to ensure the defoamer is evenly dispersed in the system.

Step three, observe the defoaming effect. If the effect is not ideal, the dosage can be appropriately increased, but be careful not to exceed the specified maximum dosage.

Step four, regularly monitor the foam in the system and adjust the dosage according to actual conditions.

A chemical company had serious foam problems in its nitric acid pickling process, which affected product quality and production progress. The company tried several defoamers without solving the problem effectively. After using Chemi Tech nitric-acid-resistant defoamer, the foam disappeared quickly and good foam suppression was maintained throughout the pickling process. Production efficiency rose substantially and product quality improved markedly.

With its efficient defoaming performance and reliable quality, Chemi Tech nitric-acid-resistant defoamer solves the foam problem of nitric acid systems for chemical companies and is a trustworthy defoaming solution.