In electronics manufacturing, oil residues on PCBs can cause circuit shorts and signal interference. Chemi Tech's degreaser series utilizes a blend of non-polar solvents and surfactants to dissolve silicone grease, solder paste, and mineral oils. The halogenated hydrocarbon and alcohol-based formula penetrates micron-scale gaps, removing stubborn contaminants under chip components without damaging solder joints or ceramic substrates.
Case Study: Elevating Yield in EMS Production
An electronics factory faced a 12% failure rate in camera modules due to assembly oil residues. After implementing Chemi Tech's KMB-2080 degreaser with immersion-ultrasonic processing (8% concentration, 50°C, 90 seconds):
Efficiency Gain: Batch processing time dropped from 15 to 5 minutes, increasing line throughput by 25%;
Failure Reduction: Post-cleaning resistance met design specs with zero electrostatic damage, cutting failures to 1.3%;
Cost Savings: Solvent reuse for 3 cycles reduced ton-level costs by 18%.
This solution suits SMT lines and IC packaging, compatible with spray or immersion systems at 40-60°C, minimizing maintenance downtime.