Four circular tanks arranged in a group as seen from above along a green field
As the alkali liquor in soak cleaning is heated continuously, the foam layer thickens steadily and the liquid-level reading rises falsely in step; cleaning residue carried out on workpiece surfaces shows marks after drying, and rewash and touch-up washing pin the shift throughput down at the high-temperature cleaning step.
Chemi Tech supplies the KM-718 series of defoamers for the high-temperature strong-alkali soak cleaning of metal parts; the dosage is adjusted flexibly by alkali concentration, bath temperature and soak tempo. This grade is a silicone-polyether type; it does not break emulsion or separate in strong-alkali liquor above ninety degrees Celsius, and it neither strips oil from workpiece surfaces nor leaves silicone spots. The measured data on the foam-layer thickness at the tank surface and the residue rating on workpieces are recorded side by side from the same tank position, and the fitted dosage of the KM-718 series is determined accordingly; it is finalised only after the workpiece material and the upper alkalinity limit are checked in grades.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-718 series defoamer is configured for high-temperature strong-alkali soak cleaning. With a silicone-polyether formulation, it neither breaks emulsion nor separates under strong alkali and high temperature, and the bath deposits no sticky matter over long-term use; it resists high temperature and keeps its foam-suppressing duration even above ninety degrees Celsius; it breaks foam fast, thinning the foam layer at the tank surface within minutes; it tolerates a wide alkali range, so the dosage is simply rated by the bath state as alkalinity rises; it is compatible with common cleaning additives in the same bath without disturbing detergency and leaves no marks on workpiece surfaces; and the dosage is economical, rated by alkali concentration and soak tempo, so the chemical consumption per tank can be accounted directly.
Industry Pain Points and Solutions
The root of foaming in a high-temperature strong-alkali tank lies mostly in the combined effect of surface-active matter brought by high alkalinity and air entrained when workpieces enter the bath, while a rising bath temperature stabilises the fine bubbles at the liquid surface, finally concentrating in two places: the falsely high liquid level and the residue on workpieces.
When the bath alkalinity rises, the surface foam first thickens and a deviation appears between the level-meter reading and the gauge glass. KM-718 resists strong alkali; once the two readings of alkalinity and bath temperature are cleared, its dosage is re-rated by the load in the tank, and the level-meter reading and the gauge-glass reading converge.
As the bath temperature climbs further, foam breaking and regeneration play against each other, and the liquid film carried out as workpieces leave the surface leaves marks after drying. KM-718 resists high temperature; with the two grades of eighty-five and ninety-five degrees Celsius compared side by side, the residue rating narrows from grade three to grade one, and the dosage is rated to the fitted grade of that tank.
Saponified oil carried out by the workpieces accumulates in the tank and further extends the stable period of the foam. The KM-718 series adds no extra skimming frequency on this item; once alkalinity, bath temperature and oil content are all checked through, the fitted dosage of that tank is made clear and the cleaning shift executes at that magnitude.
Typical Operating Conditions and Verification
Customer case: the heat-treatment pre-treatment workshop of an automotive-parts enterprise in Jiangsu, applied to the defoaming stage of high-temperature strong-alkali soak cleaning.
This plant originally skimmed foam twice per shift, the difference between the level meter and the gauge glass stayed steadily above two divisions, and the residue on workpieces after drying showed no difference between the day and night shifts. After comparison against the two readings of bath alkalinity and temperature, KM-718 was selected as the defoaming grade for that tank, with the dosage rated by soak tempo and oil content. After commissioning, the difference between the level meter and the gauge glass narrowed to within half a division; skimming fell from twice per shift to once per day; the residue rating on workpieces improved from grade three to grade one, and the count of parts rewashed before heat treatment no longer accumulated shift by shift.
Frequently Asked Questions
If the KM-718 series is dosed over the long term in a strong-alkali tank, will it affect the cleaning quality of workpiece surfaces?
First check whether the bath alkalinity and soak temperature fall within the assessed range of that tank. The KM-718 series is a silicone-polyether type that neither breaks emulsion nor separates under strong alkali and high temperature; the measured data on foam-layer thickness at the tank surface and the residue rating on workpieces are given side by side by Chemi Tech from two sets of readings at the same tank position, and dosing at the rated magnitude does not disturb the detergency of the cleaner itself. The actual dosage is corrected by bath alkalinity and oil accumulation; Chemi Tech gives the fitted dosage of that tank through comparison of the two operating conditions.