White steam drifting from above the plant equipment toward the hillside

After high-shear dispersion of the ink and resin binder, microbubbles are slow to disappear; pinholes and craters emerge on the ink film surface, voids appear in printed colour blocks, and customer-returned batches pin the throughput down at the ink adjustment and regrinding step.

Chemi Tech supplies the KM-8801 series of defoamers for the microbubble problem in oil-based inks and resin systems; the dosage is adjusted flexibly by binder viscosity and dispersion line speed. This grade is designed specifically for oil-based systems; coexistence with common resins and solvents brings no precipitation and no clouding and causes no interference with ink-film gloss or fineness. The measured readings of pinhole density and ink-film gloss are recorded side by side from the same dispersion batch, and the fitted dosage of the KM-8801 series is made clear accordingly; the dosage is given only after resin polarity and solvent ratio are checked together.

Advantages of Chemi Tech Defoamers

The Chemi Tech KM-8801 series defoamer is configured for oil-based ink and resin binder systems. Designed specifically for oil-based systems, it coexists with resins and solvents without precipitation or clouding; its compatibility is excellent, and ink-film gloss and fineness do not fall because of dosing; it breaks foam fast, clearing the microbubbles after high-shear dispersion within the standing section; its foam-suppressing duration is long-lasting, so no shift-by-shift top-up is needed in the ink storage tank; it causes no interference with pigment wetting, keeping the colour strength of colour blocks stable; and the dosage is economical, rated by binder viscosity and line speed, so the additive cost per tonne of ink can be accounted directly.

Industry Pain Points and Solutions

The root of microbubbles in oil-based systems lies mostly in the combined effect of a too-high binder viscosity and air entrained by high-shear dispersion, while differences in resin polarity stabilise the microbubbles inside the ink film, finally concentrating in two places: pinhole density and gloss readings.

When the binder viscosity rises, the dispersed microbubbles are retained by the ink film and pinholes first show on the drawdown sheet. KM-8801 has excellent compatibility; once the two readings of viscosity and line speed are cleared, its dosage is re-rated by the polarity of that batch of ink, and the pinhole density falls back accordingly.

After the resin polarity is switched, the same dosage performs differently on two batches of binder and the gloss readings differ markedly. KM-8801 is designed specifically for oil-based systems; with alkyd and acrylic binders compared in parallel, the gloss drop from fifty-eight to fifty-two narrows to within two divisions, and the dosage is rated to the fitted grade of that batch.

As the standing time in the ink storage tank lengthens, microbubble regeneration consumes the foam-suppressing margin. The KM-8801 series has a long-lasting foam-suppressing duration and adds no extra top-up frequency on this item; once viscosity, polarity and line speed are all checked through, the fitted dosage of that batch of ink is made clear and the ink-adjustment shift executes at that grade.

Typical Operating Conditions and Verification

Customer case: the resin-binder dispersion workshop of an ink manufacturing enterprise in Guangdong, applied to the grinding and ink-adjustment stages of oil-based inks.

The pinhole density of the two binder batches differed markedly at this plant, craters on the drawdown sheet were denser on the acrylic batch, and the gloss reading was lower on the alkyd batch. KM-8801 was selected for the plant as the defoaming grade for that batch of ink, with the dosage rated by binder viscosity and dispersion line speed. Reading changes after commissioning: the pinhole density of the two ink batches converged; craters on the drawdown sheet basically no longer appeared; the gloss reading between the two batches narrowed to within two divisions; and the top-up frequency in the ink storage tank fell from once per shift to once per day.

Frequently Asked Questions

If the KM-8801 series is dosed over the long term in an oil-based system, will it throw the gloss and fineness of the ink film off course?

It depends on whether the resin polarity and solvent ratio fall within the rated range of that batch of ink. The KM-8801 series coexists with common resins and solvents without precipitation or clouding; the measured results of pinhole density, gloss readings and fineness are given by Chemi Tech after side-by-side comparison of the two binder batches, and dosing at the rated magnitude does not disturb the colour strength of colour blocks. The actual dosage is further corrected by the binder viscosity of the current batch; Chemi Tech derives the fitted dosage from the comparison results of the two ink batches.