Color-striped fabrics stacked in layers with the color bands offset in sequence

After glass-fiber cloth and industrial fabrics receive a water-repellent finish, water beads spread in sheets across the cloth surface instead of rolling off in the rain-shower test, the spray rating keeps falling as wash cycles increase, and the rework volume and claim risk for outdoor fabrics rise together.

Chemi Tech supplies the KMF-2701 series of water repellents for the water-repellent finishing of glass-fiber cloth and industrial fabrics; the dosage is adjusted flexibly by fabric weight and liquor pickup. This grade forms a continuous film on the fiber surface, balancing water-repellency rating with hand feel, and is compatible in the same bath with common resins and softeners; the two sets of measured data, the rain-shower rating and the post-wash spray rating, are brought together, and the fitted dosage for this batch of fabric becomes clear.

Advantages of Chemi Tech Water Repellents

The Chemi Tech KMF-2701 series water repellent is configured for the water-repellent finishing of glass-fiber cloth and industrial fabrics. It forms a continuous film on the fiber surface, so water beads up and rolls off the cloth; the water-repellency rating is stable, with the rain-shower test falling within the thresholds commonly set by customers; it resists washing, and the rating decays more slowly after multiple wash cycles; it has little effect on hand feel, leaving the cloth neither stiff nor harsh; its compatibility in the same bath with common resins and softeners is excellent, so no separate finishing liquor is needed; and the dosage is adjusted by fabric weight and liquor pickup, so the finishing cost per metre of cloth can be accounted over each wash cycle.

Industry Pain Points and Solutions

The root of the decay in cloth water repellency lies mostly in the combined effect of a low liquor pickup and insufficient curing crosslinking, while repeated washing in outdoor use weakens the finish film round by round, finally concentrating in two places: water penetration in the rain-shower test and the falling spray rating.

When the liquor pickup is low, the film formed on the fiber surface is not continuous enough and water beads spread in sheets in the rain-shower test. KMF-2701 forms a continuous film; once the two readings of liquor pickup and curing temperature are checked through, the dosage is re-rated by fabric type, and the rain-shower rating returns to the pass grade.

When the curing temperature is set too low, crosslinking is insufficient and the water-repellency rating slides with each wash cycle. KMF-2701 has little effect on hand feel and excellent same-bath compatibility; with the two sets of readings of the rain-shower rating and the post-wash spray rating checked side by side, the concentration of the finishing liquor is set accordingly, and water stains no longer spread to the back of the cloth.

After industrial fabrics go through multiple wash cycles, the durability of the finish film is tested further. This grade resists washing and adds no extra re-finishing rounds on this item; with fabric weight, liquor pickup and curing temperature all checked through, the fitted dosage for this batch of cloth is made clear, and the finishing workshop executes by it.

Typical Operating Conditions and Verification

Customer case: the after-finishing workshop of an industrial-textile enterprise in Fujian, applied to the water-repellent finishing stage of glass-fiber cloth and industrial fabrics.

In this plant, water beads spread in sheets on the glass-fiber cloth in the rain-shower test; after five wash cycles the spray rating of the industrial fabric fell faster than that of the glass-fiber cloth, and the hand feel of the cloth was stiff after finishing. KMF-2701 was taken as the main agent for the water-repellent finishing of this batch of cloth, with the finishing-liquor concentration rated by fabric weight and liquor pickup. The measured data before and after finishing are listed side by side: the rain-shower rating of the glass-fiber cloth rose from grade 2 to grade 4, and that of the industrial fabric from grade 3 to grade 5; after multiple wash cycles the rating decay slowed, the hand feel of the cloth stayed soft, and re-finishing rounds decreased.

Frequently Asked Questions

After multiple wash cycles, can the decay of the water-repellency rating be predicted?

It depends on whether the liquor pickup and the curing crosslinking fall within the assessed range for that fabric type. The KMF-2701 series forms a continuous film on the fiber surface and resists washing; the measured data of the rain-shower rating and the post-wash spray rating are checked out together by Chemi Tech from the wash records of the same fabric type, and the decay trend can be traced cycle by cycle, with the specific values subject to the actual conditions of that finishing plant. The actual dosage is fine-tuned further by fabric weight and liquor pickup; Chemi Tech determines the fitted dosage by combining lab samples with production-line measurements.