Rows of colour-paste tanks arranged in order from above, each holding a different hue

After a tinting centre switches to a new batch of pigment grades, the fineness readings of the colour paste refuse to come down, flooding and floating show up together in the rub-out test, the same formula has to be re-adjusted with every new batch of pigment, and the delivery lead time is pinned down at the colour-matching step.

Chemi Tech supplies the KMK-416 series of dispersants for industrial coating tinting systems; the dosage is adjusted flexibly by pigment grade, surface treatment and target solids content. This grade grips the pigment surface with its anchoring groups and does not desorb under high-shear grinding, gives a marked viscosity reduction, and has broad adaptability to both inorganic and organic pigments. The measured data on colour-paste fineness readings and rub-out floating ratings are listed grade by grade, and the precise dosage of the KMK-416 series can be read off tier by tier.

Advantages of Chemi Tech Dispersants

The Chemi Tech KMK-416 series dispersant is configured for industrial coating tinting and for pigment-by-pigment anchoring. Its anchoring groups grip the pigment surface and do not desorb under high-shear grinding; the viscosity reduction is marked, and the sand-mill current stays steady and controllable; its adaptability to inorganic and organic pigments is broad, so a grade change calls for no full re-adjustment; storage stability is strong, and the colour paste neither reverts in fineness nor floods; tinting strength and colour development stay stable, with the floating rating in the rub-out test held consistent; the dosage is switched and adjusted by pigment grade and target solids content, so the additive spend of the tinting centre can be accounted colour family by colour family.

Industry Pain Points and Solutions

The root of flooding and floating in a tinting system lies mostly in the mismatch between the pigment surface treatment and the anchoring groups of the dispersant, while raising the target solids content further compresses the distance between particles to a critical value, finally concentrating in two places: fineness reversion and rub-out floating.

Once the pigment grade is changed, the dispersant that was well anchored is pulled off course by the polarity of the new surface, and the fineness reading rebounds repeatedly near the pass line. KMK-416 runs an anchoring comparison by pigment grade and surface treatment; with these two threads cleared, the dosage is rated grade by grade, and the fineness reading no longer rebounds.

After the target solids content is raised, the colour-paste viscosity pushes up the sand-mill current, the grinding time is forced longer, and yet the fineness still cannot be brought down. KMK-416 gives a marked viscosity reduction; once the target solids content and grinding time are set, the dosage is rated to the fitted grade of that colour family, and the sand-mill current returns to a steady range.

Fineness reversion and flooding during storage are likewise within consideration. The KMK-416 series anchors fully and adds no extra re-grinding passes on this item; with the pigment grade, surface treatment and target solids content all compared through, the precise dosage of that colour family is settled at its grade, and the tinting centre doses by it.

Typical Operating Conditions and Verification

Customer case: the tinting centre of an industrial coatings enterprise in Jiangsu, applied to the colour-paste grinding and preparation stage where multiple pigment grades run on the same line.

In the first half of the year three pigment suppliers were changed. The fineness readings of the same formula under the three grades differed markedly. The floating rating in the rub-out test met spec on only one of the grades. The solution settled on three points: the dispersant used KMK-416 as the common grade for that tinting centre; the dosage was rated in tiers by pigment grade and target solids content; grinding time and sand-mill current were re-recorded by grade. After comparison: the fineness readings of the three grades converged; the floating ratings all fell within the pass range; the sand-mill current no longer swung widely with the grade; the count of re-grinding passes fell, and the colour-matching lead time was completed to the original schedule.

Frequently Asked Questions

Can a single dispersant cover multiple pigment grades across the board?

The entry point has to be two threads at once: the pigment surface treatment and the target solids content. The KMK-416 series runs a pigment-by-pigment anchoring comparison by pigment grade, with broad adaptability to inorganic and organic pigments; the measured data on fineness readings and rub-out floating ratings are given by Chemi Tech from the pigment-by-pigment comparison of the same colour family, and within the rated dosage range they do not weaken tinting strength. The actual dosage takes the pigment grade and target solids content as correction terms; Chemi Tech gives the fitted dosage of that colour family from the pigment-by-pigment comparison results.