Neatly folded fabrics stacked in piles on the finishing table

After table linen and workwear go through one round of industrial laundering at the laundry, the spray rating and oil-repellency grade slide down together, oil stains seep along the fibre gaps into the back of the fabric, and both the scrap rate and the rewash rate of the linen rise at the same time.

Chemi Tech introduces the KMF-1602 series of water repellents for the finishing of workwear and table linen; the dosage is adjusted flexibly by fabric weight, wet pickup and curing temperature. This grade forms a continuous film on the fibre surface, looks after both the spray rating and the oil-repellency grade at once, withstands industrial laundering, has little effect on hand feel, and shows excellent one-bath compatibility with common softeners and crosslinking agents. The measured AATCC 22 spray rating and the measured oil-repellency grade are laid out on the same wash record, and the fitted dosage of the KMF-1602 series is graded accordingly.

Advantages of Chemi Tech Water Repellents

The Chemi Tech KMF-1602 series water repellent is configured for the water- and oil-repellent finishing of workwear and table linen. It forms a continuous film on the fibre surface and looks after both the spray rating and the oil-repellency grade at once; it withstands industrial laundering, with the rating decay slowing after multiple wash cycles; it has little effect on hand feel, so workwear turns neither stiff nor harsh; its one-bath compatibility with common softeners and crosslinking agents is excellent, so the finishing bath needs no separate make-up; the curing-temperature window is wide, so the curing conditions already in place at the linen plant can be carried over directly; the dosage is adjusted step by step by fabric weight and wet pickup, so the cost per tonne of fabric can be spread over each wash cycle and accounted.

Industry Pain Points and Solutions

The root of water-repellency decay on linen lies mostly in the combined effect of low wet pickup and insufficient curing crosslinking, while the high-temperature, strong-alkali conditions at the laundry further weaken the integrity of the finishing film cycle by cycle, finally concentrating in two places: the spray rating and the oil-repellency grade.

When wet pickup is low, the film formed on the fibre surface is not continuous enough, and the spray rating drops a grade after the first wash. KMF-1602 forms a continuous film; once wet pickup and curing temperature are checked through, its dosage is re-rated by fabric type, and the spray rating holds at the pass grade.

When the curing temperature is set too low, crosslinking is insufficient, the oil-repellency grade slides down wash after wash, and spreading oil marks are left on the face of the table linen. KMF-1602 performs stably across both cotton and polyester-cotton grades; once the two readings of curing temperature and curing time are set, the finishing-bath concentration is graded accordingly, and oil stains no longer spread toward the back of the fabric.

The high-temperature and strong-alkali conditions at the laundry put the durability of the finishing film through one more test. The KMF-1602 series withstands industrial laundering and adds no extra re-finishing cycles on this item; with fabric weight, wet pickup and curing temperature all checked through, the fitted dosage of this batch of linen is made clear, and the finishing workshop executes at that magnitude.

Typical Operating Conditions and Verification

Customer case: the finishing workshop of a linen laundry and rental enterprise in Shanghai, applied to the water- and oil-repellent finishing stage for table linen and workwear.

After three washes the face of the table linen began to let oil through. The water-repellency rating at workwear cuffs fell faster than that of the table linen after washing. By comparison against fabric weight and washing conditions, KMF-1602 was set as the water-repellent finishing grade for this batch of linen; both padding and impregnation processing routes can be accommodated; the finishing-bath concentration was rated by wet pickup and curing temperature. Thereafter the oil stains on the face of the table linen no longer spread to the back; the spray rating and oil-repellency grade held at the pass grade after multiple wash cycles; the rating decay at workwear cuffs converged with that of the table linen; the count of discarded pieces fell back, and the number of re-finishing cycles decreased.

Frequently Asked Questions

Can the rating decay of a water repellent be predicted after multiple rounds of industrial laundering?

What have to be worked out clearly are three threads: the number of wash cycles, the washing temperature and the alkalinity of the detergent. The KMF-1602 series forms a continuous film on the fibre surface and withstands industrial laundering; the measured data on spray rating and oil-repellency grade are checked out together by Chemi Tech from the wash records of the same fabric type, so the decay trend can be traced as a curve against wash cycles, with the specific values subject to the actual conditions of that laundry. The actual dosage is fine-tuned further by wet pickup and curing temperature; Chemi Tech determines the fitted dosage from lab samples and production-line measurements.