White powder held in a container, its surface marked with traces left by stirring

After inorganic pigments are charged into the mill, the fineness reading of the colour paste is slow to fall, titanium dioxide and iron-oxide pigments both show flooding in the rub-out test, and the delivery schedule is pinned down at the grinding and colour-matching step.

Chemi Tech introduces the KMK-201 series of dispersants for titanium dioxide and inorganic pigment dispersion in waterborne industrial coatings; the dosage can be adjusted flexibly with pigment grade and target solids content. Its anchoring groups grip the inorganic pigment surface and do not desorb under high-shear grinding, its viscosity-reduction effect is significant, and its adaptability to titanium dioxide and all kinds of inorganic pigments is broad. The measured data of colour-paste fineness and rub-out flooding rating are listed by pigment grade, and the fitted dosage of the KMK-201 series is read out grade by grade.

Advantages of Chemi Tech Dispersants

The Chemi Tech KMK-201 series dispersant is configured for titanium dioxide and inorganic pigment dispersion in waterborne industrial coatings. Its anchoring groups grip the pigment surface and do not desorb under high-shear grinding; its viscosity-reduction effect is significant and the sand mill current stays steady and controllable; its adaptability to titanium dioxide and inorganic pigments is broad, so switching pigment grades does not require a full re-adjustment; tinting strength and colour development are stable and the flooding rating in the rub-out test stays consistent; its dosage is switched with pigment grade and target solids content; and its storage stability is strong, so the colour paste neither re-agglomerates nor floods within its shelf life.

Industry Pain Points and Solutions

The root of unstable inorganic pigment dispersion lies mostly in the combined effect of a mismatch between the surface coating of titanium dioxide and the adsorption strength of the anchoring groups, while prolonged grinding re-agglomerates particles already deagglomerated, finally landing in two places: fineness reversion and rub-out flooding.

When the titanium dioxide grade is changed, the dispersant that had been well anchored is deflected by the polarity of the new surface and the fineness reading rebounds repeatedly. KMK-201 makes anchoring comparisons by pigment grade and surface treatment; once the two lines are sorted out, the dosage is rated grade by grade, and the fineness reading no longer rebounds.

After the target solids content is raised, colour-paste viscosity drives the sand mill current upward and grinding time is forced longer. KMK-201 has a significant viscosity-reduction effect; once two paired sets of readings, colour-paste fineness against sand mill current and rub-out flooding rating against grinding time, are gathered and checked together, the dosage is rated to the fitted grade of that colour family and the sand mill current returns to a steady band.

When grinding time is lengthened, particles already deagglomerated re-agglomerate in the mill and re-agglomeration and flooding during storage rise with it. The KMK-201 series anchors fully and adds no extra regrinding passes on this item; once pigment grade, surface treatment and target solids content are compared item by item, the precise dosage of that colour family becomes clear grade by grade, and the tinting centre prepares material by grade.

Typical Operating Conditions and Verification

Customer case: the colour-paste grinding workshop of a waterborne industrial coatings enterprise in Jiangsu, applied to the dispersion and grinding stages of titanium dioxide and inorganic pigments.

This company had made an adjustment on the pigment supply side: colour-paste fineness readings under three pigment grades differed noticeably and the rub-out flooding rating met spec at only one of them. KMK-201 was selected as the universal dispersing grade for titanium dioxide and inorganic pigments, with the addition rated in grades by pigment grade and target solids content; colour-paste fineness and rub-out flooding rating were listed by pigment grade, and sand mill current against grinding time formed a separate paired comparison. After comparison: the fineness readings of the three grades converged; the flooding ratings all fell within the pass band; and the sand mill current no longer swung widely with pigment grade.

Frequently Asked Questions

Can one and the same dispersant cover titanium dioxide and several inorganic pigments?

What must be worked out is how pigment surface treatment and target solids content pull on anchoring. The KMK-201 series makes pigment-by-pigment anchoring comparisons by the surface characteristics of inorganic pigments, and the measured data of colour-paste fineness and rub-out flooding rating are given by Chemi Tech from pigment-by-pigment comparisons of the same colour family; within the rated dosage range it does not weaken hiding power. The dosage takes pigment grade and target solids content as correction terms, and Chemi Tech gives the fitted dosage of that colour family from the pigment-by-pigment comparison results.