Multi-colour fabric sample cards spread out page by page on a worktop

After automotive interior fabric has gone through stain-resistant finishing and multiple rounds of rubbing and cleaning-agent wiping, the spray rating and the stain-resistance grade fall together, oil stains seep through the gaps between fibres into the back of the fabric, and the rework rate and replacement rate of the seat fabric rise in step.

Chemi Tech supplies the KMF-1802 series of water repellents for the stain-resistant finishing of automotive interior fabrics; the dosage is adjusted flexibly by wet pickup and curing temperature. This grade forms a continuous film on the fibre surface, balancing spray and stain resistance, with little effect on hand feel and excellent compatibility with common softeners in the same bath. The measured spray rating and the measured stain-resistance grade after rubbing are laid out on the same finishing record, and the fitted dosage of the KMF-1802 series is graded accordingly.

Advantages of Chemi Tech Water Repellents

The Chemi Tech KMF-1802 series water repellent is configured for stain-resistant finishing of automotive interior fabrics. It forms a continuous film on the fibre surface, balancing spray rating and stain-resistance grade; it resists rubbing and cleaning-agent wiping, so rating decay slows after multiple rounds of wiping; it has little effect on hand feel, so the seat fabric neither stiffens nor feels harsh; its compatibility with common softeners in the same bath is excellent, so the finishing liquor needs no separate preparation; its curing-temperature window is wide, so the existing curing conditions of the interior plant can be used directly; and the finishing cost per metre of fabric is stepwise apportioned by wet pickup and curing temperature.

Industry Pain Points and Solutions

The root of the decay in stain resistance of interior fabric lies mostly in the combined effect of a low wet pickup and insufficient crosslinking during curing, while repeated wiping with cleaning agents progressively weakens the integrity of the finishing film, finally concentrating in two places: the spray rating and the stain-resistance grade after rubbing.

When the wet pickup is low, the film formed on the fibre surface is not continuous enough and the spray rating drops a notch right after the first round of wiping. KMF-1802 forms a continuous film; once the wet pickup and curing temperature have been checked through, its dosage is re-rated by the fabric type and the spray rating stays at the pass grade.

When the curing temperature is set too low, crosslinking is insufficient, the stain-resistance grade slips with each round of wiping, and spreading oil marks are left on the face of the fabric. KMF-1802 performs stably across both cotton and polyester-cotton grades; with the two sets of readings of wet pickup and curing temperature laid out side by side, the finishing-liquor concentration is then graded, and oil stains no longer spread toward the back of the fabric.

The durability under repeated cleaning-agent wiping must likewise be checked together. The KMF-1802 series resists wiping and adds no extra re-finishing rounds on this item; once the two items of wet pickup and curing temperature have been checked through, the fitted dosage of this batch of interior fabric is made clear and the finishing workshop organises production at that grade.

Typical Operating Conditions and Verification

Customer case: the finishing workshop of an automotive interior-parts manufacturer in Fujian, applied to stain-resistant finishing of seat fabric.

At this interior-parts company the seat fabric began to seep oil on the face after three rounds of cleaning-agent wiping, and the stain-resistance rating at the cuffs fell faster than on the main areas of fabric. KMF-1802 was selected as the water-repellent finishing grade for this batch of fabric, with the finishing-liquor concentration rated by wet pickup and curing temperature. Thereafter the oil stains on the face of the seat no longer spread toward the back; the spray rating and stain-resistance grade stayed at the pass grade after multiple rounds of wiping; the rating decay at the cuffs tended to converge with the rest; the number of reworked pieces fell back, and the number of re-finishing rounds decreased.

Frequently Asked Questions

After multiple rounds of cleaning-agent wiping, can the rating decay of a water repellent be predicted?

First look at how continuous the finishing film is on the fibre surface and how sufficient the crosslinking during curing is. The KMF-1802 series forms a continuous film and resists wiping; the measured data on spray rating and stain-resistance grade are checked out together by Chemi Tech from the wiping records of the same fabric type, and the decay trend can be plotted as a curve against the number of rounds. The actual dosage is further fine-tuned by wet pickup and curing temperature; Chemi Tech determines the fitted dosage by combining bench samples with production-line measurements.