Layers of textured color formed on a flat surface by sprayed colored powders
After an offset ink takes in a new batch of pigment, the milling fineness reading rebounds repeatedly around the pass line, floating color and mottling show up together on the draw-down sheet, and the same formulation has to be readjusted with every pigment change, so the delivery schedule is pinned down at this single dispersion step.
Chemi Tech supplies the KMK-2001 series of dispersants for the pigment dispersion systems of offset inks; the dosage is adjusted flexibly by pigment surface treatment, batch differences, target viscosity and vehicle type. The anchoring groups of this grade grip the pigment surface firmly and do not desorb under high-shear milling, and its viscosity reduction is marked; the measured data of milling fineness readings and floating-color ratings on draw-down sheets are tabulated by pigment batch, and the dosage is given in grades according to the surface treatment.
Advantages of Chemi Tech Dispersants
The Chemi Tech KMK-2001 series dispersant is configured for pigment dispersion in offset inks. Its anchoring groups grip the pigment surface firmly and do not desorb under high-shear milling; its viscosity reduction is marked, and the milling-machine current stays steady and controllable; its adaptability to inorganic and organic pigments is broad, so a batch change does not require a full readjustment; its storage stability is strong, with no coarsening or floating color in the ink; its tinting strength and color development are stable, with the floating-color rating kept consistent; and the dosage is switched by pigment surface treatment, so the additive cost per tonne of ink is itemised grade by grade by color family.
Industry Pain Points and Solutions
The root of pigment-dispersion problems in offset inks lies mostly in the combined effect of a mismatch between the pigment surface treatment and the dispersant's anchoring groups, while a raised target viscosity compresses the spacing between particles to a critical value, finally concentrating in two places: fineness rebound and floating color on the draw-down.
After a pigment batch is switched, the dispersant that had anchored well is thrown off by the polarity of the new surface, and the fineness reading rebounds repeatedly around the pass line. KMK-2001 makes the anchoring comparison by pigment surface treatment; once the two clues of batch and surface treatment are cleared, the dosage is rated grade by grade according to the pigment designation, and the fineness reading no longer rebounds.
Once the target viscosity is raised, the milling-machine current is pushed up, the milling time is forced longer, and the fineness still cannot be brought down. KMK-2001 reduces viscosity markedly; with the two sets of readings of target viscosity and milling time checked side by side, the dosage is rated to the fitted grade of that color family, and the current returns to a steady range.
Once the ink enters storage, coarsening and floating color become the main risks. This grade has strong storage stability and adds no extra re-milling rounds on this item; with batch, viscosity and surface treatment all compared through, the precise dosage of that color family can be set, and the ink workshop compounds by that grade.
Typical Operating Conditions and Verification
Customer case: the pigment-milling workshop of an offset ink enterprise in Jiangsu, applied to the dispersion and compounding stages of multiple pigment batches.
In the first half of the year this plant took in three pigment suppliers; the fineness readings of the same vehicle differed markedly across designations, and the floating-color rating met the standard on only one designation. KMK-2001 was selected as the dispersing grade for the workshop, with the dosage rated in grades by pigment surface treatment and batch. The measured readings of the three designations are listed side by side: the fineness fell from 28 micrometres to 18 micrometres, and the milling-machine current fell back from 22 amperes to 15 amperes; the floating-color ratings of the draw-down sheets all fell within the pass range, re-milling rounds decreased, and the color-matching delivery schedule was completed as originally planned.
Frequently Asked Questions
Can a single dispersant handle multiple pigment batches?
First see whether the two clues, pigment surface treatment and target viscosity, line up. The KMK-2001 series makes the anchoring comparison by pigment surface treatment and has broad adaptability to inorganic and organic pigments; the measured data of fineness readings and floating-color ratings on draw-down sheets are given by Chemi Tech from batch-by-batch comparisons within the same color family, and within the rated dosage range they do not weaken tinting strength. The actual dosage takes the pigment batch and milling time as correction items; Chemi Tech gives the fitted dosage of that color family from the pigment-by-pigment comparison results.