Close-up of industrial steel-cable coils arranged in rows
The pigment of a solvent-based coil coating refuses to drop in fineness after sand milling, and re-coarsening reappears the moment the can is opened two weeks into storage; the panel's transparency and hiding power both fall, and the color-difference meter reading swings back and forth near the pass line.
Chemi Tech supplies the KMK-412 series of wetting and dispersing agents for solvent-based industrial coatings and coil coatings; the dosage is adjusted flexibly by target solids content and pigment surface treatment. This grade is designed for solvent-based systems; its anchoring groups grip the pigment surface and do not desorb under high-shear grinding, suiting applications with higher demands on transparency and hiding power. The measured grind-fineness reading and post-storage viscosity change are combined, and the fitted dosage of the KMK-412 series is then clarified.
Advantages of Chemi Tech Dispersants
The Chemi Tech KMK-412 series wetting and dispersing agent is configured for solvent-based industrial coatings and coil coatings. Its anchoring groups grip the pigment surface and do not desorb under high-shear grinding, so the fineness no longer bounces back repeatedly; the viscosity-reduction effect is marked, and the sand-mill current settles into a steady band; its balance of transparency and hiding power is good, adapting to transparent iron oxide and high-transparency pigments alike; storage stability is strong, with no re-coarsening or floating color after heat storage; compatibility with acid-catalysed coil systems is excellent, and the curing reaction is not disturbed; and the dosage is economical, set by target solids content, so the grinding man-hours shorten.
Industry Pain Points and Solutions
The root of fineness rebound in solvent-based coil coatings lies mostly in the mismatch between the pigment surface treatment and the resin system, together with insufficient grinding shear to open the aggregates, finally concentrating in two places: the fineness reading and the heat-storage stability.
The pigment aggregates are not fully opened inside the sand mill, and the fineness reading stalls near the pass line without dropping further. KMK-412's anchoring groups grip the pigment surface, the grinding current trends steady, and the grind fineness steps down one more notch.
The dispersant gradually desorbs during storage, the pigment re-aggregates, and re-coarsening appears the moment the can is opened after heat storage. Once target solids content and pigment surface treatment are both checked, KMK-412 dosage is set by pigment grade, and the post-storage viscosity change narrows.
The color-difference meter reading swings back and forth near the pass line, and the panel color difference between batches draws objections from downstream. With the dosage set by target solids content, the color-matching rounds decrease, and the batch color difference no longer widens batch by batch.
Typical Operating Conditions and Verification
Customer case: a coil-coating manufacturer in Hebei, applied to the sand-milling and let-down stage of solvent-based topcoats.
The grind fineness stalled near the pass line without dropping further; re-coarsening appeared the moment the can was opened after two weeks of heat storage; and the panel's transparency and hiding power varied markedly between two batches, with the color-difference feedback from the downstream lamination line clustering on the same batch of paint. Matched by pigment grade and target solids content, the mill's dispersant was pointed to KMK-412, with the dose stepped by the sand-mill charge volume. After it went in, the grind fineness stepped down one more notch; the post-storage viscosity change trended steady; and the panel's transparency and hiding power came into agreement between batches.
Frequently Asked Questions
After switching dispersants, do the film's transparency and hiding power need to be re-verified?
The pigment grade and the target solids content must each be checked separately, with the transparency item compared on its own, before the conclusion can be settled. KMK-412 has already completed comparative measured tests of grind fineness and heat-storage viscosity in solvent-based coil coatings; within the recommended range the transparency and hiding-power readings both meet the acceptance requirement. The dosage takes target solids content as the yardstick, with pigment grade and grinding charge volume added by measurement; Chemi Tech settles it by the comparative verification of fineness and heat-storage viscosity.