A refinery process-unit cluster and storage tanks merging into one in the distance
Once the foam layer in the spin-finish bath builds up against the godet roller, cavitation of the finish circulation pump and uneven liquid pick-up of the tow follow, and the deviation in finish pick-up of the finished yarn and the count of fuzzy filaments are amplified together at the winding stage.
Chemi Tech supplies the KM-830 series of defoamers for the spin-finish circulation system of polyester filament spinning; the dosage is adjusted flexibly by finish concentration, bath temperature and spinning speed. This grade is temperature-resistant and non-oil-depositing: its foam-breaking speed does not decay at higher bath temperatures, it does not attach to the emulsifying components of the finish and leave oil sludge on the godet roller, and it does not disturb finish pick-up or tow cohesion. The measured data on foam-layer height in the finish bath and tow finish pick-up are placed on one inspection sheet, and the precise dosage of the KM-830 series is settled from them.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-830 series defoamer is configured for spin-finish baths and finish-circulation stations. Its temperature resistance is stable, so the foam-breaking speed does not decay as bath temperature rises; it breaks foam fast, and the surface foam falls back visibly after a brief stop of the circulation pump; its foam-suppression duration is long-lasting, so no extra replenishment rounds are added when spinning speed is raised; it is non-oil-depositing, so no oil sludge accumulates on the godet roller or the finish nozzle; the dosage is economical, graded by finish concentration; and its compatibility with emulsifying components is excellent, so tow cohesion is not changed by dosing.
Industry Pain Points and Solutions
The root of foaming in finish circulation lies mostly in the combined effect of enriched emulsifying components in the finish and rising bath temperature, while the high shear of the circulation pump further stabilises microbubbles on the finish-bath surface, finally producing two problems: deviation in finish pick-up and a rising count of filament breaks.
When finish concentration runs high, a fine dense foam first gathers on the finish-bath surface and the liquid carried by the godet roller fluctuates in step. KM-830 is temperature-resistant and non-oil-depositing; once the two readings of finish concentration and bath temperature are set, its dosage is re-rated by the load of the spinning position, and tow finish pick-up returns to within the process band.
After spinning speed is raised, the finish circulation rises in step and foam is carried into the finish nozzle, so the uniformity of tow liquid pick-up and the count of fuzzy filaments deteriorate together. KM-830 does not lose foam-breaking power at higher bath temperatures; the two sets of readings, finish-bath foam-layer height against tow finish pick-up, and godet-roller liquid carry-over against winding filament breaks, are compared side by side, the addition is rated to the fitted grade of that line, and the count of fuzzy filaments no longer climbs shift after shift.
When bath temperature reaches the upper limit, the emulsifying components hold the foam stable for longer and the godet-roller wiping rounds increase in step. The KM-830 series does not attach to emulsifying components and adds no extra shutdown cleaning on this item; once the three readings of finish concentration, bath temperature and spinning speed are gathered, the fitted dosage of that line becomes clear and the spinning hall schedules inspection at that grade.
Typical Operating Conditions and Verification
Customer case: the spinning hall of a polyester filament producer in Jiangsu, applied to the fore-spinning finish bath and finish-circulation sections.
Before the switch, foam in the finish bath often spilled over the bath rim and the godet roller had to be stopped and wiped twice every shift. After comparing finish concentration and bath temperature, KM-830 was chosen, with the addition rated by spinning speed and foam-layer height; finish-bath foam-layer height and tow finish pick-up were logged by shift, and godet-roller liquid carry-over against winding filament breaks formed a second side-by-side set. After the solution was in place, tow finish pick-up returned to within the process band; winding filament breaks no longer climbed shift after shift, and the godet-roller cleaning cycle was stretched from once a shift to once every two shifts.
Frequently Asked Questions
Will long-term dosing of the KM-830 series into the finish circulation tank affect tow cohesion?
First check whether finish concentration and bath temperature fall within the process window of that line. The KM-830 series is temperature-resistant and non-oil-depositing and does not attach to emulsifying components; the measured data on finish-bath foam-layer height and tow finish pick-up are given by Chemi Tech from side-by-side measurement of the same spinning position, and dosing at the rated magnitude does not change the original cohesion state of the tow. The actual addition is corrected by spinning speed and liquid pick-up, and Chemi Tech gives the fitted dosage of that line from side-by-side measurement at the same spinning position.