Oil and gas processing units and gathering pipelines arranged in groups under lighting at night
After the high-temperature overflow dyeing machine is heated up, foam accumulated at the nozzle forces fluctuations in the dyebath circulation, the fabric picks up liquor unevenly, dye-lot shade variation and uneven dyeing appear together, and the rework schedule is drawn out accordingly.
Chemi Tech has introduced the KM-901 series of defoamers for the soaping and high-temperature overflow dyeing stages of textile dyeing and printing; the dosage is adjusted flexibly by dyebath temperature, soaping alkalinity, liquor ratio and foam-suppression duration. This grade is of the modified polysiloxane type; it does not break emulsion or separate into layers in high-temperature, strongly alkaline dyebaths, is compatible with scouring agents and penetrants in the same bath, and does not affect fabric hand. The measured data on foam-layer height in the dye vat and on the trend of nozzle differential pressure are checked together, and the fitted dosage for this machine type is graded according to dyebath temperature and soaping requirements.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-901 series defoamer is configured for the soaping and high-temperature overflow dyeing of textile dyeing and printing. It withstands high temperature and strong alkali, and does not break emulsion or separate into layers when the dyebath rises to the high-temperature stage; its foam-suppression duration is long-lasting, with a single dose covering the whole overflow dyeing cycle and the number of replenishments noticeably reduced; its compatibility is excellent, with no precipitation or flocculation when used with scouring agents and penetrants in the same bath, and the fabric hand does not become stiff; the defoaming speed is fast, and foam accumulated at the nozzle dissipates rapidly as circulation falls back; and the dosage is economical, rated by dyebath temperature and soaping alkalinity, so the auxiliaries cost per tonne of fabric can be accounted for directly.
Industry Pain Points and Solutions
The root of foaming in high-temperature dyebaths lies mostly in the combined effect of residual surface-active substances from the soaping stage and the high-shear circulation at the nozzle, while a rise in dyebath temperature further stabilises the foam at the liquid surface, finally concentrating in two places: dye-lot shade variation with uneven dyeing, and nozzle blockage.
When the dyebath temperature is raised, the surface tension of the dye liquor in the high-temperature stage shifts downward, the nozzle draws fine bubbles into the circulation, and the liquor pickup becomes uneven accordingly. KM-901 withstands high temperature and strong alkali; once the dyebath temperature and holding-time readings are set, its fitted dosage is re-rated by the vat volume of that machine type, and the foam-layer height falls back within the range allowed by the circulation pump.
When alkalinity in the soaping stage is on the high side, residual surface-active substances increase accordingly, and the frequency of foam overflow and the dye-lot shade-variation grade rise together. KM-902 performs consistently in foam breaking across both the ambient-temperature low-alkali and the high-temperature strong-alkali grades; once the alkalinity and liquor-ratio readings are checked together, the precise dosage is graded at once; by comparison, the shade-variation grade of the high-alkali vat falls into the same interval as that of the low-alkali vat, and the number of nozzle blockages no longer multiplies with alkalinity.
With dyestuffs and auxiliaries combined in the same bath, the most easily disturbed are fabric hand and dye penetration. The KM-901 series has excellent compatibility and does not precipitate when combined with common dyestuffs and auxiliaries in the same bath, adding no extra re-washing cycles on this item; once the temperature, alkalinity and liquor-ratio readings are checked through, the dyehouse fixes the dosage for this machine type at that grade and no longer re-adjusts it vat by vat.
Typical Operating Conditions and Verification
Customer case: the overflow dyeing workshop of a knit dyeing and finishing enterprise in Jiangsu, applied to the high-temperature overflow dyeing and soaping stages.
Before the switch, the shade-variation grades of two high-temperature overflow dyeing machines of the same type in this plant had long fallen into two different grades, and the nozzles had to be dismantled and cleaned once at every high-alkali soaping. After comparison of dyebath temperature and soaping alkalinity, KM-901 was adopted as the defoaming grade for this workshop, with the dosage rated by liquor ratio and foam-suppression duration. After commissioning, the two machines were logged side by side: one at the original dosage and one at the rated dosage; the shade-variation grade of the former still rebounded near the pass line, while that of the latter and the trend of nozzle differential pressure converged; the nozzle dismantling and cleaning interval ran to the original schedule, and the count of reworked pieces from the same vat fell back.
Frequently Asked Questions
With high-temperature dyeing and soaping carried out in the same vat, will long-term dosing affect fabric hand and dye penetration?
It depends on whether the same-bath combination falls within the assessment range of this set of dyestuffs and auxiliaries. The KM-901 series is compatible with scouring agents and penetrants in the same bath and does not affect fabric hand; the measured data on foam-layer height and shade-variation grade are checked out side by side by Chemi Tech on the same overflow dyeing machine. If the dyebath temperature or soaping alkalinity is adjusted on site, the dosage is corrected by these two readings; Chemi Tech gives the fitted dosage for that grade from controlled measurements on the same machine type.