Striped fabric hanging down to form continuous vertical folds

After several wash cycles, the spray rating and the oil-repellency grade of water-repellent-finished polyester and nylon outdoor fabrics decline together, water stains penetrate inward along the fiber interstices, and garment re-washing and downgraded dispatch volumes rise accordingly.

Chemi Tech has introduced the KMF-603 series of water repellents for the water-repellent finishing of polyester and nylon outdoor fabrics; the dosage is adjusted flexibly by fabric grammage, wet pickup and curing temperature. This grade forms a continuous film on the fiber surface, covers both the spray rating and the oil-repellency grade, is excellently compatible with common resins and softeners in the same bath, and withstands multiple wash cycles. The measured data on spray rating and oil-repellency grade are filed into the same washing record, and the grade of this batch of fabric is settled lot by lot by the combination of grammage and wet pickup.

Advantages of Chemi Tech Water Repellents

The Chemi Tech KMF-603 series water repellent is configured for the water-repellent finishing of polyester and nylon outdoor fabrics. It forms a continuous film on the fiber surface and covers both the spray rating and the oil-repellency grade; it withstands industrial laundering, and the rating decay slows after multiple wash cycles; it is excellently compatible with common resins and softeners in the same bath, so the finishing liquor need not be prepared as a separate system; the dosage is adjusted grade by grade with fabric grammage and wet pickup, and the cost per tonne of fabric can be accounted across each wash cycle; and the effect on hand is small, with the finished fabric neither stiff nor harsh.

Industry Pain Points and Solutions

The root of water-repellency decay in outdoor fabrics lies mostly in the combined effect of low wet pickup and insufficient curing crosslinking, while the high temperature and alkalinity of the washing step further weaken the integrity of the finishing film cycle by cycle, finally concentrating in two places: the spray rating and the oil-repellency grade.

When wet pickup is low, film formation on the fiber surface is not continuous enough, and the spray rating drops one grade after the first wash cycle. KMF-603 forms a continuous film; once wet pickup and curing temperature are checked through, its fitted dosage is re-rated by fabric type, and the spray rating stays in the pass grade.

When the curing temperature is set too low, crosslinking is insufficient, the oil-repellency grade declines wash cycle by wash cycle, and spreading oil marks are left on the face of the fabric. KMF-803 performs consistently in film formation across both lightweight and heavyweight fabrics; once the curing-temperature and curing-time readings are checked together, the precise dosage is graded at once; by comparison, the oil-repellency grade of lightweight fabrics falls into the same interval as that of heavyweight fabrics, and oil stains no longer spread to the back of the fabric.

With the number of wash cycles and the alkalinity of the detergent, the most easily disturbed is the durability limit of the finishing film. The KMF-603 series withstands industrial laundering and adds no extra re-finishing cycles on this item; once grammage, wet pickup and curing temperature are checked through, the fitted dosage of this batch of fabric is made clear, and the existing curing temperature need not be adjusted separately.

Typical Operating Conditions and Verification

Customer case: the heat-setting workshop of an outdoor fabric finishing mill in Fujian, applied to the water-repellent heat-setting finishing stage of polyester and nylon fabrics.

Before the switch in this mill, the face of the fabric began to let water through after three wash cycles, the oil-repellency grade of lightweight articles fell faster than that of heavyweight ones, and the number of downgraded outbound rolls rose month by month. By comparison of fabric grammage and wet pickup, KMF-603 was set as the water-repellent finishing grade for this batch, with the finishing-liquor concentration rated by wet pickup and curing temperature. After commissioning, the two grammages were logged side by side: lightweight articles at the original dosage and heavyweight articles at the rated dosage; the spray rating of the former still rebounded between two grades, while that of the latter and the oil-repellency grade converged; after multiple wash cycles the rating decay traced a gentle curve against cycle count, and the number of downgraded outbound rolls fell back.

Frequently Asked Questions

After multiple wash cycles of outdoor fabrics, can the decay of the spray rating be predicted?

What directly decides rating durability is how continuous the finishing film is on the fiber surface. The KMF-603 series forms a continuous film on the fiber surface and withstands industrial laundering; the measured data on spray rating and oil-repellency grade are checked out by Chemi Tech from the washing records of the same fabric type, and the decay trend can be plotted as a curve against cycle count. After wet pickup or curing temperature is changed, the actual dosage is fine-tuned to the new finishing conditions; Chemi Tech determines the fitted dosage from lab samples and production-line measurements.