Multi-coloured powders held separately in containers, with distinct hue boundaries at the edges
After coil coating pigments are changed to a new batch, the fineness readings rebound; finger-rub flooding and floating appear together in the same pot of colour paste, hiding power fluctuates with the batch number, and the batch handover of the tinting section is thereby stretched out.
Chemi Tech supplies the KMK-412 series of dispersants for pigment dispersion in solvent-borne coil coatings; the dosage is adjusted flexibly by pigment grade, surface treatment and target solids content. In this grade the anchoring groups grip the pigment surface firmly and do not desorb under high-shear grinding; the viscosity-reducing effect is marked and the sand-mill current stays steady and controllable; its adaptability to both inorganic and organic pigments is broad, and wetting and dispersion do not separate into layers in acid-catalysed systems. The measured data on colour-paste fineness readings and on finger-rub floating ratings are listed by pigment grade, and the precise dosage of the KMK-412 series can be read off grade by grade.
Advantages of Chemi Tech Dispersants
The Chemi Tech KMK-412 series dispersant is configured for pigment grinding and tinting of solvent-borne coil coatings. Its anchoring groups grip the pigment surface firmly and do not desorb under high-shear grinding; the viscosity-reducing effect is marked and the sand-mill current stays steady and controllable; storage stability is strong, with no reversion to coarse particles and no floating in the colour paste; and colour development and hiding power still land in the same range after a batch change, so the finger-rub rating does not drift with the pigment grade.
Industry Pain Points and Solutions
The root of fineness rebound and flooding/floating in coil coating colour pastes lies mostly in the combined effect of differences in surface polarity between pigment batches and the build-up of grinding shear heat; in acid-catalysed systems the resin's wetting window for the pigment is narrow, and the trouble finally concentrates in two problems: fineness readings and hiding power.
When the pigment batch number is changed, the polarity of the new surface no longer matches the existing anchoring groups, the fineness readings drift repeatedly around the acceptance line, and floating shows on the surface of the pot. KMK-412's anchoring groups grip the pigment surface firmly; with both the grade and surface-treatment records set, its precise dosage is re-rated for that batch and the fineness readings land within the acceptance line.
After the target solids content is raised, the viscosity of the colour paste pushes the sand-mill current up, the grinding time has to be lengthened, yet transparency and hiding power are slow to settle. KMK-412 has a marked viscosity-reducing effect and performs stably across both high-solids and low-solids grades; once the target solids content and sand-mill current are compared side by side, the dosage is graded accordingly and the hiding-power reading returns to the same range.
After the colour paste stands overnight in the storage tank, reversion to coarse particles and layer separation show most readily. The KMK-412 series holds the particles steady through sufficient anchoring and adds no extra regrinding runs on this item; once grade, solids content and standing time are all compared, the fitted dosage of that tinting section is made clear, hiding power no longer fluctuates with the batch number, and the tinting section is commissioned at that grade.
Typical Operating Conditions and Verification
Customer case: a colour-coated coil producer in Hubei, applied to the coil-topcoat pigment grinding and tinting stages.
This plant ran three pigment batches in parallel on the same line: fineness readings pulled apart from pot to pot, hiding power behaved differently between the deep-colour and light-colour grades, and the sand-mill current swayed with the pigment grade. Using the per-pigment anchoring records of the three batches as reference, the plant equipped the tinting section with KMK-412, with the dosage of this grade rated in steps by surface treatment and target solids content. After the parallel run, the fineness readings of the three batches drew into the same range, the hiding power of the deep-colour and light-colour grades converged, the sand-mill current no longer swayed with the pigment grade, and the handover of colour-matching batches was no longer held up by the grinding section.
Frequently Asked Questions
When the KMK-412 series is switched to another pigment grade, does the whole formulation have to be reworked?
First check whether the pigment grade and surface treatment fall into the same anchoring-comparison band. The KMK-412 series anchors itself firmly on the pigment surface through its anchoring groups; the measured data on fineness readings and finger-rub floating ratings are checked out by Chemi Tech from the side-by-side grinding records of the three batches, and within the rated dosage range they do not disturb transparency or hiding power. The addition rate is corrected in steps by pigment grade and target solids content; Chemi Tech gives the precise dosage for that colour range from the measured data of the per-pigment comparisons.