Coloured powders spread out on a flat surface forming vivid colour blocks
After the tinting kettle is switched to a batch of carbon black grade, the color-paste fineness reading swings back and forth near the pass line, flooding and floating show up together in the rub-out test, and the tinting lead time is pinned down at the grinding step.
Chemi Tech has introduced the KMK-130 series of dispersants for waterborne color pastes and ink colouring systems; the dosage is adjusted flexibly by pigment grade, target solids content and grinding time. The anchoring groups of this grade grip the pigment surface and do not desorb under high-shear grinding, the viscosity-reduction effect is marked, and its adaptability to carbon black and organic pigments is broad. The measured data on color-paste fineness readings and rub-out flooding grades are tabulated grade by grade, and the precise dosage of the KMK-130 series is read grade by grade; since the pigment surface treatment differs from one color range to another, the anchoring grades are set color range by color range by Chemi Tech from the pigment-by-pigment comparison results.
Advantages of Chemi Tech Dispersants
The Chemi Tech KMK-130 series dispersant is configured for waterborne color pastes and ink colouring. Its anchoring is adequate, and the dispersant does not desorb under high-shear grinding; the viscosity-reduction effect is marked, and the sand-mill current stays smooth and controllable; its adaptability to carbon black and organic pigments is broad, so switching grades does not require a full re-adjustment; and its storage stability is strong, so the color paste neither reverts in fineness nor floods, and the fineness readings after a grade switch are logged side by side by color range.
Industry Pain Points and Solutions
The root of flooding and floating in waterborne color pastes lies mostly in the combined effect of a biased polarity of the pigment surface and weak anchoring of the anchoring groups, while a rise in target solids content compresses the interparticle spacing to a critical value, finally concentrating in two places: fineness rebound and flooding in the rub-out test.
When the pigment grade is changed, the dispersant that had anchored well is pulled off course by the polarity of the new surface, and the fineness reading rebounds repeatedly near the pass line. KMK-130 anchors adequately; once the two clues of pigment grade and surface treatment are sorted out, its fitted dosage is rated grade by grade, and the fineness reading no longer rebounds.
After the target solids content is raised, the viscosity of the color paste pushes the sand-mill current up, the grinding time is forced longer, yet the fineness still cannot be brought down. KMK-130 has a marked viscosity-reduction effect; once the sand-mill current and color-paste fineness readings of the same color range before and after the solids adjustment are brought together for comparison, the dosage is rated to the fitted grade of that color range, the sand-mill current returns to a stable interval, and the fineness reading falls within the pass line.
When the storage period is lengthened, the already dispersed particles in the color paste re-agglomerate, and fineness reversion and flooding show up together at re-inspection. The KMK-130 series anchors adequately and adds no extra re-grinding cycles on this item; once the three readings of grade, solids content and grinding time are checked through, the precise dosage of that color range is fixed at its grade, and the tinting center records this grade in the grinding ledger by color range.
Typical Operating Conditions and Verification
Customer case: the tinting center of a waterborne ink producer in Jiangsu, applied to the grinding stages of carbon black color paste and ink colouring.
In the first half of the year this plant changed carbon black suppliers three times; the fineness readings of the same formulation under the three grades differed noticeably, the rub-out flooding grade reached the pass level on only one of the grades, the sand-mill current fluctuated widely with the grade, and the number of re-grinding cycles increased month by month. By comparison of pigment grade and target solids content, KMK-130 was selected as the general dispersing grade for that tinting center, with the addition rated in grades by grinding time and surface treatment. After commissioning, the fineness readings of the three grades converged and the flooding grades all fell into the pass interval; the two sets of readings were given side by side in the same pigment-by-pigment record, the sand-mill current no longer fluctuated widely with the grade, and the tinting lead time was completed to the original schedule.
Frequently Asked Questions
Can one and the same dispersant grade cover the anchoring of both carbon black and organic pigments?
The pigment surface treatment, target solids content and rub-out flooding grade must be compared side by side. The KMK-130 series runs pigment-by-pigment anchoring comparisons by pigment grade; the measured data on fineness readings and rub-out flooding grades are given by Chemi Tech from pigment-by-pigment comparisons of the same color range, and within the rated dosage interval they do not weaken tinting strength. The actual addition takes pigment grade and target solids content as correction terms; Chemi Tech gives the precise dosage of that color range from the pigment-by-pigment comparison results.