The circular basin body and connecting walkway of a water treatment tank seen from above

After micro-bubbles take up the effective volume of the spin-finish circulation tank ahead of the winder, intermittent metering-pump supply and uneven oil pickup on the tow follow one after another, and deviations in package build and unwinding tension show up together at the cone-winding inspection.

Chemi Tech supplies the KM-880 series of defoamers for polyester filament winding and spin-finish circulation systems; the dosage is adjusted flexibly by spin-finish concentration, circulation flow and bath temperature. This grade is heat-resistant and does not cling to the spin finish: its foam-breaking speed does not decay at higher bath temperatures, it does not combine with the emulsifying components of the finish to leave deposits on the metering pump and filter elements, and it does not disturb oil-film uniformity. The measured data on circulation-tank foam-layer height and tow oil pickup are placed side by side, and the fitted dosage of the KM-880 series is fixed from them.

Advantages of Chemi Tech Defoamers

The Chemi Tech KM-880 series defoamer is configured for the spin-finish circulation and metered-supply stations ahead of winding. Its heat resistance is stable, so the foam-breaking speed does not decay as the bath temperature rises; defoaming is fast, and the surface foam falls back markedly after a brief stop of the circulation pump; foam suppression is long-lasting, so no extra dosing rounds are added when the circulation flow is raised; it does not cling to the finish, so no deposits build up on the metering pump or filter elements; the dosage is economical, rated in steps by spin-finish concentration; and compatibility with the emulsifying components is excellent, keeping tow oil-film uniformity stable and controllable.

Industry Pain Points and Solutions

The root of micro-bubble entrainment in spin-finish circulation lies mostly in the combined effect of air drawn in at the oil-return line and the enrichment of emulsifying components, while the high shear of the circulation pump further stabilises the micro-bubbles at the tank surface, finally producing two problems: intermittent supply and uneven oil pickup.

When the spin-finish concentration runs high, a fine dense foam first builds on the circulation-tank surface and the metering-pump outlet flow fluctuates with it. KM-880 is heat-resistant and does not cling to the finish; once the spin-finish concentration and circulation-flow readings are set, its dosage is re-rated by the winding position, and the supply flow is brought back within the process band.

After the circulation flow is raised, air intake at the return line rises in step, and the tank foam-layer height and the package unwinding tension climb together. KM-880 loses no foam-breaking power at higher bath temperatures; by comparing the two sets of readings, circulation-tank foam-layer height against tow oil pickup, and metering-pump outlet flow against unwinding tension, the dosage is rated to the fitted grade of that line, and the unwinding tension no longer falls position by position.

When the bath temperature is pushed to its upper limit, the emulsifying components hold the micro-bubbles stable for longer and filter-element replacement rounds increase in step. The KM-880 series does not combine with the emulsifying components and adds no extra shutdowns for disassembly and washing on this item; once the three readings of spin-finish concentration, circulation flow and bath temperature are gathered, the precise dosage of that line becomes clear and the winding workshop schedules its inspection rounds at that grade.

Typical Operating Conditions and Verification

Customer case: the winding workshop of a polyester industrial-yarn producer in Fujian, applied to the spin-finish circulation tank and metered-supply stages.

Before the switch, foam in the circulation tank often overflowed the return port and the metering pump had to be bled twice per shift. KM-880 was selected after comparison against spin-finish concentration and circulation flow, with the dosage rated by bath temperature and foam-layer height; the circulation-tank foam-layer height and tow oil pickup were logged per shift, and the metering-pump outlet flow and package unwinding tension were compared as a separate set. After the programme was in place, the supply flow returned within the process band; the package unwinding tension no longer fell position by position, and the filter-element replacement cycle stretched from once a week to once a fortnight.

Frequently Asked Questions

Will long-term dosing of the KM-880 series in a winding spin-finish system change the oil-film uniformity of the tow?

The key is whether the spin-finish concentration and bath temperature fall within the process margin of that line. The KM-880 series is heat-resistant, does not cling to the finish and does not combine with the emulsifying components; the measured data on circulation-tank foam-layer height and tow oil pickup are given by Chemi Tech from side-by-side measurements on the same winding section, and dosing at the rated magnitude does not change the tow's original oiling rhythm. The actual dosage is referenced to the circulation flow, and Chemi Tech gives the fitted programme for that line from the side-by-side comparison.