Rows of colourant cans arranged in tiers on wooden racks

After waterborne gravure ink leaves doctor-blade lines on the plate cylinder, the deviation in print solid density and dot reproduction is amplified as printing speed rises, and plate changes and ink adjustment pin the throughput down at the printing step.

Chemi Tech supplies the KMK-133 series of dispersants for the premixing and dispersion systems of waterborne gravure ink; the dosage is adjusted flexibly by pigment oil absorption, resin solids content and sand-mill fineness. This grade designs anchoring chain segments for organic-pigment surfaces, holds the interparticle spacing steady in the waterborne resin, causes no flocculation with the thickening components, and clearly narrows the fineness reversion over the ink's storage life. The measured data on grindometer fineness and solid density are placed side by side, and the optimal dosage of the KMK-133 series is fixed from them.

Advantages of Chemi Tech Dispersants

The Chemi Tech KMK-133 series dispersant is configured for the premixing and grinding stations of gravure ink. Its anchoring strength is high, keeping organic pigments dispersed even under high oil absorption; the viscosity-reduction effect is marked, with the ink-viscosity reading clearly falling at the same solids content; compatibility is excellent, with no flocculation against the waterborne resin or the thickening components; foam suppression is stable, so micro-bubbles in the plate-cylinder circulation tank do not multiply as printing speed rises; the dosage is economical, rated in steps by resin solids content; and the rebound of grindometer fineness over the storage life stays stable and controllable.

Industry Pain Points and Solutions

The root of doctor-blade lines lies mostly in the combined effect of incomplete pigment deagglomeration and slow resin wetting, while high-speed printing pushes the undispersed agglomerates onto the doctor-blade edge, finally producing two problems: a solid-density gap and distorted dot reproduction.

When pigment oil absorption runs high, agglomerates are left behind first at the premixing stage and the grindometer-fineness reading climbs with it. KMK-133 has strong anchoring; once the oil-absorption and resin-solids readings are set, its dosage is re-rated by the grinding batch, and the fineness narrows to the target band.

After printing speed is raised, plate-cylinder ink feed and shear rise together, and the solid-density and dot-reproduction readings fall in step. KMK-133 holds the interparticle spacing steady in the waterborne resin; by comparing the two sets of data, grindometer fineness against solid density, and ink viscosity against the dot-reproduction grade, the dosage is rated to the fitted grade of that batch, and the solid density no longer falls roll by roll.

When resin solids content is pushed to its upper limit, free resin bridges the particles and the fineness reversion over storage is amplified in step. The KMK-133 series causes no flocculation with the thickening components and adds no extra regrinding rounds on this item; once the three readings of oil absorption, resin solids content and sand-mill fineness are gathered, the precise dosage of that batch becomes clear and the ink-making workshop arranges its charging records at that grade.

Typical Operating Conditions and Verification

Customer case: the ink-making workshop of a flexible-packaging printer in Hunan, applied to the waterborne gravure ink premixing and sand-milling stages.

Before the switch, doctor-blade lines often covered the whole print width and the solid density had to be re-adjusted once per roll. KMK-133 was adopted as the dispersion programme after comparison against pigment oil absorption and resin solids content, with the dosage rated by sand-mill fineness and grinding temperature; the grindometer fineness and solid density were logged per batch, and the ink viscosity and dot-reproduction grade were compared as a separate set. After the programme was in place, the grindometer fineness narrowed to the target band; the solid density no longer fell roll by roll, and regrinding rounds fell from once per shift to once every two shifts.

Frequently Asked Questions

Will dosing the KMK-133 series into high-oil-absorption organic pigments push up the storage viscosity of the ink?

It is governed by whether the resin solids content and sand-mill fineness fall within the dispersion window of that batch. The KMK-133 series has strong anchoring and causes no flocculation with the thickening components; the measured data on grindometer fineness and solid density are given by Chemi Tech from side-by-side measurements on the same batch, and dosing at the rated magnitude does not change the ink's original rheological rhythm. The actual dosage is corrected by oil absorption, and Chemi Tech gives the fitted programme for that batch from the side-by-side comparison.