Powders of different colour shades piled in separate compartments of a container, with saturated hues
The pigment particles deagglomerated in the dispersing disc of UV ink re-agglomerate after entering the UV-curing stage, and the deviations in fineness reading and ink-film gloss show up together at screen-print proofing.
Chemi Tech has introduced the KMK-4009 series of dispersants for UV inks and photo-curing systems; the dosage is adjusted flexibly by pigment specific surface area, prepolymer viscosity and dispersing disc speed. This grade designs anchoring segments for the photoinitiator system, holds the interparticle distance steady in the oligomer, does not compete with the photoinitiator for the absorption band, and leaves the curing rate and ink-film adhesion unaffected. The measured data on grind-gauge fineness and ink-film gloss are set side by side, and the optimal dosage of the KMK-4009 series is settled from them.
Advantages of Chemi Tech Dispersants
The Chemi Tech KMK-4009 series dispersant is configured for UV ink premixing and dispersing stations. Its anchoring strength is high, so pigments with high specific surface area stay dispersed in the oligomer; its viscosity reduction is marked, so the ink viscosity reading falls clearly at the same solids content; its compatibility is excellent, with no competition with the photoinitiator for the absorption band; its foam suppression is stable, so microbubbles entrained during dispersing do not multiply as disc speed rises; the dosage is economical, graded by prepolymer viscosity; and the extent of fineness rebound after UV curing stays stable and controllable.
Industry Pain Points and Solutions
The root of fineness reversion in UV systems lies mostly in the combined effect of high pigment specific surface area and slow wetting by the prepolymer, while the high shear of the dispersing disc re-aggregates the deagglomerated particles, finally producing two problems: fineness rebound and falling ink-film gloss.
When pigment specific surface area runs high, the adsorbable sites on the particle surface are filled up first and the grind-gauge fineness reading rises in step. KMK-4009 has high anchoring strength; once the two readings of specific surface area and prepolymer viscosity are set, its dosage is re-rated by the dispersing batch, and the fineness narrows to the target band.
After the dispersing disc speed is raised, system temperature and shear rise together and ink viscosity and ink-film gloss fall in step. KMK-4009 holds the interparticle distance steady in the oligomer; the two sets of data, grind-gauge fineness against ink-film gloss, and ink viscosity against curing rate, are compared side by side, the addition is rated to the fitted grade of that batch, and gloss no longer falls batch after batch.
When prepolymer viscosity reaches the upper limit, free oligomer bridges the particles and the extent of fineness reversion during storage grows in step. The KMK-4009 series does not compete with the photoinitiator for the absorption band and adds no extra curing recheck rounds on this item; once the three readings of specific surface area, prepolymer viscosity and disc speed are gathered, the precise dosage of that batch becomes clear and the ink workshop schedules its charging records at that grade.
Typical Operating Conditions and Verification
Customer case: the UV-curing workshop of a screen-printing ink manufacturer in Chongqing, applied to UV pigment premixing and high-speed dispersing stages.
Before the switch in this plant, grind-gauge fineness needed re-milling once every batch and ink-film gloss could not long reach the proofing benchmark. After comparison of pigment specific surface area and prepolymer viscosity, KMK-4009 was adopted as the dispersing scheme, with the addition rated by dispersing disc speed and system temperature; grind-gauge fineness and ink-film gloss were logged by batch, and ink viscosity against curing rate formed a second side-by-side set. After the solution was in place, grind-gauge fineness narrowed to the target band; ink-film gloss no longer fell batch after batch, and re-milling rounds were cut from once a shift to once every two shifts.
Frequently Asked Questions
Will dosing the KMK-4009 series into a photo-curing system slow down the curing rate of UV ink?
Work out the ratio of pigment specific surface area to prepolymer viscosity and the occupancy of the anchoring segments can be read out. The KMK-4009 series does not compete with the photoinitiator for the absorption band; the measured data on grind-gauge fineness and ink-film gloss are given by Chemi Tech from controlled side-by-side measurement of the same dispersing batch, and dosing at the rated magnitude does not change the original curing rhythm of the system. The actual addition takes disc speed as a correction term, and Chemi Tech gives the fitted scheme of that batch from the side-by-side comparison.