White steam rising from tall chimneys spreading under a pale pink sky
Once fine dense microbubbles build up on the surface of a centralized cutting-fluid circulation tank, the supply pressure fluctuates in step, the tool cooling effect and the surface finish of the workpiece fall together, the false high level-gauge reading triggers erroneous replenishment, and the tempo of the whole machining line is pinned at the supply link.
Chemi Tech has introduced the KM-330 series of defoamers for centralized cutting-fluid circulation tanks in metalworking; the dosage is adjusted flexibly by cutting-fluid concentration, tank temperature, supply pressure and circulation flow rate. This grade is of the silicone type, with fast defoaming and long-lasting foam suppression, resistant to shear and high temperature; the dilution is uniform and does not separate, it can be dosed internally without changing the original lubrication and rust-prevention performance of the cutting fluid. The measured data on foam height at the tank surface and defoaming time are recorded side by side, and the dosage is graded step by step by differences in mixing ratio and temperature.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-330 series defoamer is configured for metalworking cutting-fluid circulation systems. It resists shear, and its foam-breaking ability does not decay under the high-speed circulation of the supply pump; it resists high temperature, keeping a long-lasting foam-suppression duration as the tank temperature rises; its compatibility is excellent, causing no emulsion breaking or oil floating when coexisting with emulsifiable and semi-synthetic fluids; the defoaming speed is fast, and surface microbubbles fall back visibly; and the dilution is uniform and does not separate, leaving no deposits on the tank wall or filter screen under long-term circulation.
Industry Pain Points and Solutions
The root of foaming in the centralized circulation tank lies mostly in the combined effect of surfactant enrichment in the cutting fluid and high shear from the supply pump, while entrained air at a high circulation flow rate further stabilises the microbubbles at the liquid surface, finally concentrating in two places: supply-pressure fluctuation and a false high level-gauge reading.
When the cutting-fluid mix is enriched, microbubbles at the tank surface first gather into a layer, the supply pressure fluctuates in step, and the tool cooling effect falls together. KM-330 resists shear; once the two readings of mixing concentration and circulation flow rate are cleared, the dosage is re-rated by the surface state of the tank, and the microbubble layer narrows to an observable low grade.
After the tank temperature rises, foam pushes the level-gauge reading off target and the replenishment frequency and defoaming time lengthen together. KM-330 resists high temperature; with the two sets of readings, tank level and supply pressure, set on the same record, the addition is rated to the fitted grade of that tank, and the level-gauge reading returns within the true band.
Deposits on the filter screen and nozzles must also be checked together; the KM-330 dilution is uniform and does not separate, adding no extra disassembly-and-cleaning rounds on this item; once the three readings of mixing ratio, temperature and pressure are checked through, the precise dosage of that tank is settled, the machining workshop replenishes at that grade, and the supply pressure returns to the set band.
Typical Operating Conditions and Verification
Customer case: a precision machining enterprise in Jiangsu, applied to the supply defoaming stage of a centralized cutting-fluid circulation tank.
A layer of microbubbles that would not dissipate for a long time floated on the tank surface, the supply pressure kept falling after the shift started, the false high level repeatedly triggered the automatic replenishment valve, and the tool-change interval fell noticeably short of the ledger record. KM-330 was taken as the defoaming grade for that tank, with the addition rated by cutting-fluid concentration and circulation flow rate; the plant combined the two sets of data, supply pressure and level reading, on one spot-inspection sheet. After the switch, surface microbubbles fell back quickly once the supply pump started, the supply pressure returned to the set band, the automatic replenishment valve no longer operated erroneously, the tool-change interval tended to agree with the ledger record, and the disassembly-and-cleaning interval of the tank-wall filter screen lengthened noticeably.
Frequently Asked Questions
Will internal dosing of a defoamer into the cutting fluid throw the stability of the dilution off course?
What directly determines whether the microbubbles in the centralized circulation tank converge is the surface tension and shear strength of the cutting fluid. The KM-330 series resists shear and high temperature, and the dilution is uniform and does not separate; the measured data on foam height and defoaming time are given by Chemi Tech after side-by-side comparison of the same circulation tank, and dosing at the rated magnitude does not weaken the lubrication and rust-prevention ability of the cutting fluid. The specific addition is calibrated again by cutting-fluid concentration and tank temperature, and Chemi Tech determines the dosage of that tank from bench and production-line measured data.