Fine water droplets gathering into beads along the weave on the surface of a red fabric
After polyester-cotton workwear fabric passes through the finishing line for water-repellent treatment, the spray rating falls one grade after the first industrial wash, the oil-repellency grade declines in step with the cycles, water stains penetrate along the weave toward the back of the fabric, and the re-washing rate and the number of rejected pieces of the finished garments rise together.
Chemi Tech has introduced the KMF-1701 series of water repellents for the water-repellent finishing of polyester-cotton workwear fabric; the dosage is adjusted flexibly by wet pickup. This grade forms a continuous film on the fibre surface, giving consideration to both spray rating and oil-repellency grade, withstands industrial laundering, has little effect on hand, and is highly compatible in the same bath with common softeners and crosslinkers. The measured data on AATCC 22 spray rating and oil-repellency grade are set on the same wash record, and grades are set separately by fabric grammage and wet pickup.
Advantages of Chemi Tech Water Repellents
The Chemi Tech KMF-1701 series water repellent is configured for the water-repellent finishing of polyester-cotton workwear fabric. It forms a continuous film on the fibre surface, giving consideration to both spray rating and oil-repellency grade; it withstands industrial laundering, so the decline in grade after multiple wash cycles slows; it is highly compatible in the same bath with common softeners and crosslinkers, so the finishing liquor need not be prepared by a separate system; and it has little effect on hand, so the finished workwear is neither stiff nor harsh and wearing comfort does not fall because of the water-repellent finishing.
Industry Pain Points and Solutions
The root of water-repellency decay in polyester-cotton workwear lies mostly in the combined effect of low wet pickup and insufficient curing crosslinking, while the high-temperature, strongly alkaline conditions of the washing stage progressively weaken the integrity of the finishing film cycle by cycle, finally concentrating in two places: spray rating and oil-repellency grade.
When wet pickup runs low, film formation on the fibre surface is not continuous enough and the spray rating falls one grade after the first wash. KMF-1701 forms a continuous film; once wet pickup and curing temperature are checked through, its dosage is re-rated by fabric type, and the spray rating stays at the acceptance grade.
When the curing temperature is set too low, crosslinking is insufficient, the oil-repellency grade falls with each wash cycle, and spreading watermarks are left on the face of the workwear. KMF-1701 performs stably across both cotton and polyester-cotton grades; the two sets of ratings, spray rating and oil-repellency grade, are combined on the same wash record, the finishing-liquor concentration is graded accordingly, and water stains no longer spread toward the back of the fabric.
The high-temperature, strongly alkaline conditions of the laundry put the durability of the finishing film to a further test; KMF-1701 withstands industrial laundering and adds no extra touch-up finishing rounds on this item; once the three items of grammage, wet pickup and curing temperature are checked through, the fitted dosage of this batch of fabric is made clear, and the finishing workshop thereby maps the decline in rating over multiple wash cycles into a curve.
Typical Operating Conditions and Verification
Customer case: a workwear manufacturer in Shandong, applied to the water-repellent finishing stage of polyester-cotton workwear.
After three washes, the cuffs of the workwear began to seep water, the water-repellency rating on the cuffs fell faster after washing than on the body, the oil-repellency grade dropped out of the acceptance grade at the fifth wash, and the number of rejected pieces rose month by month. KMF-1701 was chosen as the finishing grade for this batch of fabric, with the finishing-liquor concentration rated by wet pickup and curing temperature; the plant merged the two sets of ratings, spray rating and oil-repellency grade, into the same wash record. After the solution was in place, water stains no longer penetrated along the weave toward the back of the fabric, the spray rating and oil-repellency grade stayed at the acceptance grade after multiple wash cycles, the decline in rating at the cuffs tended to agree with the body, the number of rejected pieces fell back, and touch-up finishing rounds decreased.
Frequently Asked Questions
Can the decline in rating of a water repellent after multiple industrial washes be predicted in advance?
It all depends on how continuous the finishing film is on the polyester-cotton weave and whether the curing crosslinking is in place. The KMF-1701 series forms a continuous film on the fibre surface and withstands industrial laundering; the measured data on spray rating and oil-repellency grade are checked out by Chemi Tech from the wash records of the same fabric type, the decline trend can be mapped into a curve with the cycles, and the specific values are subject to the actual conditions of that finishing workshop. The finishing dosage is fine-tuned by wet pickup and curing temperature, and Chemi Tech gives the fitted dosage of that batch of fabric after mapping the curve from lab-sample and production-line measured data.