Pumpjacks rising in groups on a barren surface
Once the foam layer in the fermenter rises above the sight glass, the dissolved-oxygen reading keeps falling, the oxygen-uptake rate of the cells and the product-synthesis rate fall in step, the vessel pressure is forced up to maintain aeration, and the harvest titre of the whole fermentation batch is pressed to the lower edge of the pass line.
Chemi Tech supplies the KM-833 series of defoamers for microbial fermentation systems using molasses, a by-product of sugar making, as the medium; the dosage is adjusted flexibly by four parameters: aeration ratio, vessel pressure, molasses feed concentration and fermentation temperature. This grade resists high temperature, acid and alkali; coexisting with the molasses medium it does not change the oxygen uptake and metabolic rhythm of the cells, and it does not decompose or fail in the sterilisation section. The measured data on dissolved-oxygen readings and foam-layer height are filed by batch, and the precise dosage of the KM-833 series is thereby made clear.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-833 series defoamer is configured for microbial fermentation broth and molasses medium. It resists high temperature and does not decompose or fail in the sterilisation section; it resists acid and alkali, and its foam-suppressing ability does not decay when pH fluctuates; coexisting with the fermentation broth it does not change the oxygen uptake and metabolic rhythm of the cells, and the product-synthesis rate does not fall because of the dosing; its compatibility is excellent, and the colloids in the molasses do not entangle with the defoaming components; its foam-suppressing duration is long-lasting, and the frequency of top-up dosing within one fermentation batch is noticeably reduced.
Industry Pain Points and Solutions
The root of foaming in the fermentation broth lies mostly in the combined effect of residual sugar in the molasses medium and cell metabolites, while at a high aeration ratio the bubbles are sheared into fine bubbles by the agitator and stabilised at the liquid surface, finally concentrating in two places: the dissolved-oxygen reading and the foam-layer height.
After the aeration ratio is raised, the foam in the fermenter first rises above the sight glass, the dissolved-oxygen reading falls in step, and the oxygen-uptake rate drops together. KM-833 resists high temperature, acid and alkali; once the aeration ratio and vessel pressure readings are set, its fitted dosage is re-rated by batch, and the foam-layer height narrows to below the sight glass.
As the molasses feed concentration rises, the viscosity of the medium stabilises the fine bubbles at the liquid surface, and the vessel pressure and harvest titre fall together. KM-833 has excellent compatibility with the molasses medium; the dissolved-oxygen saturation at the two molasses feed concentrations of 60 grams per litre and 90 grams per litre are recorded side by side, at 30% and 18% respectively; the dosage is rated to the fitted grade of that vessel, and the harvest titre returns within the design band.
As the fermenter enters the fed-batch stage, the residual sugar fed in stabilises the foam at the liquid surface and the tail-gas carbon dioxide and oxygen-uptake rate change in step. The KM-833 series does not decompose or fail in the sterilisation section, and the defoaming top-up still follows the batch; once the feeding rhythm of that batch is changed, the records of aeration ratio, vessel pressure and feed concentration must be gathered again, and the fermentation workshop schedules the precise dosage into the feeding table from the gathered records.
Typical Operating Conditions and Verification
Customer case: an amino-acid fermentation enterprise in Guangxi using molasses as feedstock, applied to the foam-control stage of the fermenter and the seed tank.
The harvest titre stayed below the design band for three consecutive batches, the foam layer rose above the sight glass after feeding, the dissolved-oxygen reading had to be maintained by raising the vessel pressure, and the tail-gas carbon dioxide and oxygen-uptake rate did not corroborate each other. KM-833 was selected for the feeding stage, with the dosage rated by aeration ratio and molasses feed concentration; the plant recorded the two sets of dissolved-oxygen saturation data of 30% and 18% side by side in the batch record. After the switch, the foam layer stayed below the sight glass, the dissolved-oxygen reading no longer depended on raising the vessel pressure, the harvest titre returned within the design band, and the number of defoaming top-up rounds per batch fell from four to two.
Frequently Asked Questions
Will dosing a defoamer into the fermenter suppress the oxygen uptake and product synthesis of the cells?
First see whether the aeration ratio and vessel pressure can hold the dissolved-oxygen reading of the broth near the design value; only then is there a comparable reference for the foam-layer height. The KM-833 series, coexisting with the molasses medium, does not change the oxygen uptake and metabolic rhythm of the cells; the measured data on dissolved-oxygen readings and harvest titre are checked against each other by Chemi Tech for the same fermentation batch, and dosing at the rated magnitude does not weaken the product-synthesis rate. Chemi Tech gives the fitted dosage of the fermentation batch from the side-by-side measurement of aeration ratio and vessel pressure; the field then makes fine adjustments using the dissolved-oxygen readings in the batch record.