Dark-colored fabric rolls stacked in piles on a tabletop

After outdoor tent fabric finishes water-repellent finishing, the fabric surface leaks after the first round of rain, the spray rating falls with each wash cycle, the hydrostatic head drops in step, water stains penetrate along the weave to the back side, and the re-finishing rate of rolled fabric rises.

Chemi Tech supplies the KMF-1702 series of water repellents for the water-repellent finishing of outdoor tent fabric; the dosage is adjusted flexibly by fabric weight and wet pick-up, combined with the curing temperature. This grade forms a continuous film on the fibre surface, balancing the spray rating and the hydrostatic head together, and resists industrial washing. The measured data on the AATCC 22 spray rating and the hydrostatic head are laid out on the same finishing record, and the precise dosage of the KMF-1702 series is graded accordingly.

Advantages of Chemi Tech Water Repellents

The Chemi Tech KMF-1702 series water repellent is configured for the water-repellent finishing of outdoor tent fabric. It forms a continuous film on the fibre surface, balancing the spray rating and the hydrostatic head together; it resists industrial washing, and the rating decay slows after multiple wash cycles; its curing-temperature window is wide and the curing range needs no separate adjustment; its compatibility with softeners and crosslinkers in the same bath is excellent, so the finishing liquor needs no separate formulation; and it has little effect on hand feel, leaving the tent fabric neither stiff nor harsh after folding.

Industry Pain Points and Solutions

The root of water-repellency decay in tent fabric lies mostly in the combined effect of a too-low wet pick-up and insufficient curing crosslinking, while outdoor rain and multiple wash cycles progressively weaken the integrity of the finishing film, finally concentrating in two places: the spray rating and the hydrostatic head.

When the wet pick-up is too low, the film formed on the fibre surface is not continuous enough and the spray rating drops one notch after the first round of rain, leaving water marks on the fabric surface. KMF-1702 forms a continuous film; once the wet pick-up and fabric weight readings are checked through, its fitted dosage is re-rated by fabric type, and the spray rating stays at the pass grade.

When the curing temperature is set to its lower limit, crosslinking is insufficient and the hydrostatic head falls with each wash cycle. KMF-1702 performs stably on both thin and heavy tent fabrics; with the two wet pick-up grades of 60% and 80% recorded respectively, and the hydrostatic-head readings of 2000 millimetres against 3200 millimetres, the finishing-liquor concentration is graded accordingly, and water stains no longer spread to the back of the fabric.

Between finishing-batch changeovers, differences in fabric weight pull the wet pick-up off course and the rating records from roll to roll change in step. Rain and washing put the durability of the finishing film to the test again; the KMF-1702 series resists industrial washing and the integrity of the finishing film can be checked cycle by cycle; once the fabric weight, wet pick-up and curing temperature are all checked through, the fitted dosage of this batch of tent fabric is made clear and the finishing workshop prepares the batch liquor at that magnitude.

Typical Operating Conditions and Verification

Customer case: an outdoor tent-fabric finishing enterprise in Fujian, applied to the water-repellent finishing stage of tent fabric.

After one round of rain the tent fabric began to leak, the spray rating fell faster after washing than that of apparel fabric, the hydrostatic head dropped out of the pass grade after multiple washes, and the number of rejected rolls rose month by month. KMF-1702 was selected as the finishing grade for this batch of tent fabric, with the finishing-liquor concentration rated by wet pick-up and curing temperature; the plant entered the two sets of hydrostatic-head readings of 2000 millimetres and 3200 millimetres into the wash records. After the switch, water stains no longer penetrated to the back of the fabric, the spray rating and hydrostatic head stayed at the pass grade after multiple washes, the rating decay from roll to roll converged, the number of rejected rolls fell back, and the number of re-finishing cycles decreased.

Frequently Asked Questions

Can the rating decay of a water repellent after multiple rounds of rain and washing be predicted?

Only when fabric weight, wet pick-up and curing temperature are entered into the same finishing record can the decay trend of the spray rating be traced. The KMF-1702 series forms a continuous film on the fibre surface; the measured data on the spray rating and hydrostatic head are filed together with the wash records of the same fabric type, and Chemi Tech derives the decay curve from them, with the specific values subject to the actual conditions of that finishing workshop. The measured data of the same batch of tent fabric is the basis for the finishing dosage; Chemi Tech determines the precise dosage from it, and the field makes further fine adjustments using the finishing records of fabric weight and wet pick-up.