Two tall chimneys rising vertically in front of a red-brick factory building along the plant site

The liquid-level reading at the reflux drum of the atmospheric-vacuum tower top runs falsely high, the tray pressure drop of the delayed-coking fractionator rises in step, liquid carry-over in the overhead gas and the cutting precision of the wax-oil fraction both decline, and the operating crew can only buy temporary stability of the two towers by cutting the throughput.

Chemi Tech supplies the KM-6100 series of defoamers for atmospheric-vacuum distillation and delayed-coking fractionation systems in refineries; the dosage can be adjusted flexibly by the acid number of the crude oil, the tower-top temperature and the pressure drop of the fractionator. This grade is a silicone-free formulation, resists high temperature and acid-alkali conditions, forms no silicone scale on trays or packing surfaces under long-term dosing, and does not aggravate the foaming tendency of the distillate itself. The measured readings of the liquid-level fluctuation in the overhead reflux drum and the trend of the fractionator pressure drop are recorded side by side, and the precise dosage of the KM-6100 series is given directly by these two sets of data; the dosing grades of the two towers are listed separately by distillation-range width and processing load, each with a margin.

Advantages of Chemi Tech Defoamers

The Chemi Tech KM-6100 series defoamer is configured for the atmospheric-vacuum tower and the delayed-coking fractionator of refineries. It is a silicone-free formulation, so long-term dosing forms no silicone scale on trays or packing surfaces and adds no extra cleaning workload during turnaround; it resists high temperature and does not decompose or fail in the relatively hot oil-and-gas environment at the tower top; it resists acid and alkali, so its foam-suppressing ability does not decay when degradation products accumulate in the circulating distillate; coexisting with lean solution, rich solution and the wax-oil fraction, it does not aggravate the system's own foaming tendency; it breaks foam fast, with the false-level reading of the overhead reflux drum falling back visibly; and the dosage is economical, rated by the acid number of the crude oil, so the defoaming cost per tonne of oil processed can be accounted directly.

Industry Pain Points and Solutions

The root of foaming in atmospheric-vacuum distillation and coking fractionation lies mostly in the combined effect of surface-active substances brought by a high acid number of the crude oil and vapour-liquid shear inside the tower, while the accumulation of degradation products in the circulating distillate stabilises the foam above the trays, finally concentrating in two places: the false level at the tower top and the pressure drop of the fractionator.

When the acid number of the crude oil is high, the foam layer in the vapour-liquid separation space at the atmospheric-vacuum tower top thickens first, a falsely high reflux-drum level follows, and liquid carry-over in the overhead gas appears within the same shift. KM-6100 resists high temperature and acid-alkali conditions; once the two readings of acid number and tower-top temperature are set, its dosage is re-rated by the load inside the tower, and the false-level reading converges with the field gauge glass.

After the throughput of the fractionator is raised, the foam on the trays lifts the pressure drop by one notch and the cutting precision of the wax-oil fraction declines in step. KM-6100 is silicone-free and resists high temperature; with the measured readings of tower-top temperature and fractionator pressure drop checked side by side, the dosage is set to the fitted grade of that tower, the pressure drop falls from 3.6 kPa to 2.4 kPa, and the distillation-range overlap of the wax-oil fraction narrows from 14% to 6%, with both sets of readings checkable on the same sheet.

When the turnaround cycle is lengthened, the fouling tendency of the tray and packing surfaces draws more attention. The KM-6100 series is a silicone-free formulation and adds no extra cleaning workload on this item; once the three readings of acid number, tower-top temperature and fractionator pressure drop are checked through, the precise dosages of the two towers are made clear and the operating crew executes accordingly.

Typical Operating Conditions and Verification

Customer case: a local refinery in Liaoning, applied to foam control in atmospheric-vacuum tower-top oil-and-gas separation and in the delayed-coking fractionator.

The company had been raising the setpoint of the fractionator pressure drop shift by shift; the overhead reflux-drum level never matched the field gauge glass, and the distillation-range overlap of the wax-oil fraction grew markedly after a tank switch. KM-6100 was selected for that refinery as the defoaming grade for the two towers, with the addition rate rated by the acid number of the crude oil and the tower-top temperature. After comparison, the false-level reading at the tower top converged with the gauge glass; the fractionator pressure drop fell from 3.6 kPa to 2.4 kPa; the distillation-range overlap of the wax-oil fraction narrowed from 14% to 6%, and during turnaround one less layer of deposits was found on the tray surfaces.

Frequently Asked Questions

Does long-term dosing of the KM-6100 series leave silicone scale on the trays and packing surfaces?

The tower-top temperature and the fractionator pressure drop must be compared side by side to judge the trend of the foam layer separately from the fouling tendency. The KM-6100 series is a silicone-free formulation, so long-term dosing forms no silicone scale on trays or packing surfaces; the measured data for the false-level reading and the fractionator pressure drop are given by Chemi Tech after side-by-side measurement in the same section, and dosing within the rated dosage grade does not impair the cutting precision of the distillate. If the acid number of the crude oil or the processing load changes during a shift, the actual addition rate is revised accordingly, and the fitted dosage of each of the two towers is checked out by Chemi Tech from the side-by-side readings.