Several bowls holding powders of different hues

After titanium dioxide is charged into high-speed dispersion, the slurry fineness reading is slow to come down, the disperser-disc current keeps rising with grinding time, flooding and floating colour show up together in the rub-out test, and the same formulation has to be readjusted every time the grade is changed.

Chemi Tech supplies the KMK-212 series of dispersants for high-speed dispersion of titanium dioxide slurry; the dosage can be adjusted flexibly grade by grade by the surface treatment of the titanium dioxide, the target solids content and the disperser-disc rotation speed. This grade's anchoring groups grip the pigment surface firmly and do not desorb under high-shear grinding; it markedly reduces viscosity and has broad adaptability to both chloride-process and sulfate-process titanium dioxide. The measured readings of the sand-mill current and the slurry fineness are filed by disperser-disc rotation speed, and the precise dosage of the KMK-212 series is made clear together with the grade; different grades of titanium dioxide correspond grade by grade by surface treatment, and the slurry-preparation section uses them accordingly.

Advantages of Chemi Tech Dispersants

The Chemi Tech KMK-212 series dispersant is configured for high-speed dispersion and sand milling of titanium dioxide slurry. Its anchoring groups grip the pigment surface firmly and do not desorb under high-shear grinding; it markedly reduces viscosity, keeping the disperser-disc current steady and controllable; it has broad adaptability to chloride-process and sulfate-process titanium dioxide, so changing grades requires no complete readjustment; tinting strength and colour development are stable, and the flooding rating of the rub-out test stays consistent; the dosage shifts with the target solids content and the disperser-disc rotation speed, so the additive cost of the slurry-preparation section can be accounted colour system by colour system; and its storage stability is strong, with no coarsening or separation after the titanium dioxide slurry stands.

Industry Pain Points and Solutions

The root of unstable dispersion of titanium dioxide slurry lies mostly in the mismatch between the surface treatment of the pigment and the anchoring groups of the dispersant, while raising the target solids content compresses the spacing between particles to a critical value, finally concentrating in two places: fineness rebound and disperser-disc current.

As soon as the pigment grade is changed, the well-anchored dispersant is thrown off by the polarity of the new surface, the fineness reading rebounds repeatedly near the pass line, and the grinding time is forced longer. KMK-212 makes anchoring comparisons by surface treatment, rates its dosage grade by grade by pigment grade, and the fineness reading no longer rebounds while the disperser-disc current returns to a steady range.

After the target solids content is raised, the slurry viscosity pushes up the disperser-disc current, yet the discharge fineness of the sand mill still cannot be brought down. KMK-212 markedly reduces viscosity; with the measured readings of target solids content and disperser-disc rotation speed checked side by side, the dosage is rated to the fitted grade of that pigment grade, the disperser-disc current falls from 42 A to 31 A, and the slurry fineness narrows from 28 microns to 15 microns, with both sets of readings recorded on the same sheet.

When the slurry temperature rises in summer, the slurry becomes more sensitive to dispersant adsorption. The KMK-212 series anchors fully and adds no extra regrinding passes on this item; once the three items of grade, solids content and rotation speed are compared through, the precise dosage of that pigment grade is graded, and the slurry-preparation section records them separately by grade.

Typical Operating Conditions and Verification

Customer case: a titanium dioxide producer in Sichuan, applied to high-speed dispersion and sand milling of titanium dioxide slurry.

The plant changed titanium dioxide suppliers twice in the first half of the year; the fineness readings of the same formulation differed markedly between the two grades, and the flooding rating of the rub-out test passed for only one of them. KMK-212 was applied and rated grade by grade by surface treatment and target solids content, and the disperser-disc rotation speed was re-recorded by grade. After comparison, the fineness readings of the two grades converged; the disperser-disc current fell from 42 A to 31 A; the slurry fineness narrowed from 28 microns to 15 microns, the number of regrinding passes fell, and the slurry-preparation delivery schedule was completed as originally planned.

Frequently Asked Questions

Can the KMK-212 series cover both chloride-process and sulfate-process titanium dioxide?

The key lies in the match between the surface treatment of the titanium dioxide and the grinding shear, which decides whether the anchoring holds. The KMK-212 series makes pigment-by-pigment anchoring comparisons by grade and has broad adaptability to both types of titanium dioxide; the measured data for fineness readings and the flooding rating of the rub-out test are given by Chemi Tech from comparisons by grade within the same colour system, and tinting strength is not weakened within the rated dosage range. The actual addition rate of different grades is corrected by surface treatment and target solids content, and Chemi Tech determines the fitted dosage of that colour paste from the grade-by-grade comparison results.