End faces of coloured fabric rolls arranged in groups with concentric layered textures
After the footwear mesh fabric is padded and finished, the spray rating drops one notch in the very first wash, water droplets seep along the gaps between fibres into the inner layer of the shoe upper, the re-finishing rate and the scrap rate of the footwear material rise together, and the order delivery schedule is pinned down at the water-repellent step.
Chemi Tech supplies the KMF-1801 series of water repellents for the water-repellent finishing of footwear mesh fabric; the dosage can be adjusted flexibly by fabric weight and wet pick-up. This grade forms a continuous film on the fibre surface, balancing the spray rating with resistance to water penetration, resists washing, has little effect on hand feel, and is highly compatible in the same bath with common crosslinking agents. The measured spray rating and wet pick-up are laid out on the same finishing record, and the fitted dosage of the KMF-1801 series is graded accordingly; the concentration of the finishing liquor is adjusted by the mesh fabric weight and wet pick-up, and the workshop rates it batch by batch.
Advantages of Chemi Tech Water Repellents
The Chemi Tech KMF-1801 series water repellent is configured for the water-repellent finishing of footwear mesh fabric. It forms a continuous film on the fibre surface, balancing the spray rating with resistance to water penetration; it resists washing, so the rating decays more slowly after multiple wash cycles; it is highly compatible in the same bath with common crosslinking agents, so the finishing liquor need not be prepared by a separate system; its curing-temperature window is wide, so the existing curing conditions of the mesh fabric can be used directly; the dosage is adjusted step by step by fabric weight and wet pick-up, so the cost per tonne of fabric can be apportioned to each batch; and it has little effect on hand feel, leaving the finished mesh fabric neither stiff nor harsh.
Industry Pain Points and Solutions
The root of the decay in water repellency of the mesh fabric lies mostly in the combined effect of a low wet pick-up and insufficient curing crosslinking, while the mechanical friction during wear and laundering of the footwear progressively weakens the integrity of the finishing film, finally concentrating in two places: the spray rating and resistance to water penetration.
When the wet pick-up is low, the film formed on the fibre surface is not continuous enough, the spray rating drops one notch after the first wash, and the inner layer of the shoe upper seeps water accordingly. KMF-1801 forms a continuous film; once the wet pick-up and curing temperature are checked through, its dosage is re-rated by the mesh fabric weight, and the spray rating stays at the pass grade.
When the curing temperature is set too low, crosslinking is insufficient, the water-repellent grade declines wash cycle by wash cycle, and spreading watermarks are left on the face of the mesh fabric. KMF-1801 performs stably on both thin and heavy types of mesh fabric; with the measured readings of curing temperature and curing time checked side by side, the finishing-liquor concentration is graded accordingly, the spray rating returns from grade 3 to grade 4, and the static water absorption falls from 22% to 8%, with both sets of readings filed side by side.
As the number of wash-and-care cycles of the finished shoes increases, the durability of the finishing film is tested once more. The KMF-1801 series resists washing and adds no extra re-finishing cycles on this item; once fabric weight, wet pick-up and curing temperature are all checked through, the fitted dosage of this batch of mesh fabric is made clear and the finishing workshop prepares the liquor at that grade.
Typical Operating Conditions and Verification
Customer case: a footwear-material fabric finishing enterprise in Hubei, applied to the padded water-repellent finishing of footwear mesh fabric.
The plant had seen the face of the mesh fabric begin to seep water after a single wash, the water absorption of the shoe-upper inner layer rising faster than expected after laundering, and re-finished batches accumulating month by month. KMF-1801 was chosen as the water-repellent finishing grade for this batch of mesh fabric, with the finishing-liquor concentration rated by wet pick-up and curing temperature. After comparison, the spray rating returned from grade 3 to grade 4; the static water absorption fell from 22% to 8%; the watermarks on the face of the mesh fabric no longer spread into the inner layer, the re-finished batches fell back, and the finishing section's shift plan was completed to the original schedule.
Frequently Asked Questions
After multiple wash cycles, can the rating decay of the KMF-1801 series be predicted?
What directly determines the water-repellent grade is the combination of curing temperature and wet pick-up, which decides whether the film is complete. The KMF-1801 series forms a continuous film on the fibre surface and resists washing; the measured data for spray rating and static water absorption are checked out by Chemi Tech from the wash-and-care records of the same fabric type, the decay trend can be plotted as a curve against the number of cycles, and the specific values are subject to the actual conditions of the finishing plant. The actual addition rate of the finishing liquor is fine-tuned by the mesh fabric weight and wet pick-up, and Chemi Tech determines the precise dosage of this batch from bench-sample ratings and production-line measured data.