White smoke rising from several industrial chimneys spreading out under a blue sky

Fine bubbles pack the coolant of high-pressure grinding and heavy cutting, heat exchange at the wheel-and-workpiece contact zone is cut off, surface burn on the workpiece and the frequency of wheel dressing rise together, and the machining tempo is pinned down at the grinding step.

Chemi Tech supplies the KM-495 series of defoamers for coolant systems in high-pressure grinding and heavy cutting; the dosage is adjusted flexibly by the grinding wheel speed, the fluid supply pressure, the grinding-fluid concentration and the chip load. This grade breaks foam fast under high-speed shear and coexists with common extreme-pressure agents and rust inhibitors without changing the lubrication and anti-rust balance of the formulation. The measured results of the foam half-life and the wheel-dressing interval are filed into the same grinding record, and the fitted dosage of the KM-495 series is thereby made clear.

Advantages of Chemi Tech Defoamers

The Chemi Tech KM-495 series defoamer is configured for coolant in high-pressure grinding and heavy cutting. It resists high-speed shear and does not fail in the high-shear environment of the wheel-and-workpiece contact zone; it breaks foam fast, so the fine bubbles in the coolant dissipate rapidly in the return tank; it is highly compatible with extreme-pressure agents and rust inhibitors, so the lubrication and anti-rust balance is not disturbed; its foam-suppressing ability is long-lasting, so the coolant change interval is stretched; and the additive cost per ground piece is stepwise apportioned by fluid supply pressure and chip load.

Industry Pain Points and Solutions

The root of foaming in a high-pressure grinding system lies mostly in the combined effect of strong shear from a high fluid supply pressure and air carried in on the surface of the chips, while raising the grinding wheel speed further stabilises the fine bubbles in the coolant, finally concentrating in two places: the foam half-life and the wheel-dressing interval.

Once the grinding wheel speed is raised, the fine bubbles in the coolant thicken first and heat exchange at the wheel-and-workpiece contact zone worsens in step. KM-495 resists high-speed shear; once the two readings of wheel speed and fluid supply pressure are cleared, its dosage is re-rated by the load of that grinding machine and the foam half-life shortens markedly.

When the fluid supply pressure is turned up, fine bubbles are entrained into the circulation lines and burn marks on the workpiece surface increase in step. KM-495 breaks foam fast; with the two sets of readings of grinding-fluid concentration and chip load laid out side by side, the dose is then rated to the fitted grade of that machine tool and burn marks no longer appear.

The anti-rust and lubrication balance is likewise within consideration. The KM-495 series is highly compatible with extreme-pressure agents and rust inhibitors and adds no extra formulation adjustment on this item; once the four items of wheel speed, fluid supply pressure, concentration and chip load have been checked through, the fitted dosage of that grinding machine is graded and the machining workshop schedules production by that grade.

Typical Operating Conditions and Verification

Customer case: the grinding workshop of a precision machining enterprise in Zhejiang, applied to coolant defoaming at high-pressure grinding and heavy cutting.

This plant had previously changed its coolant every two weeks, the frequency of wheel dressing fluctuated from batch to batch, and burn marks on the workpiece surface recurred in spot checks. KM-495 was set as the replacement, with the dosage rated by fluid supply pressure and chip load. After use, the coolant change interval was stretched to once a month; burn marks on the workpiece surface no longer appeared; the wheel-dressing interval tended to stabilise, and the shift plan for high-pressure grinding was completed to the original schedule.

Frequently Asked Questions

If the dosage of the coolant defoamer is increased, will it disturb the lubrication and anti-rust balance?

What is compared side by side is the foam half-life, the wheel-dressing interval and the workpiece surface quality. The KM-495 series is highly compatible with extreme-pressure agents and rust inhibitors; the measured data on half-life and dressing interval are given by Chemi Tech from the grinding records of the same machine tool, and within the rated dosage range the formation of the extreme-pressure film is not weakened. The actual dosage is corrected by fluid supply pressure and chip load; Chemi Tech gives the dosage grade of that machine tool from the stepwise comparison results.