Industrial units and stacks arranged in groups under a deep blue night sky
Oil vapour from the coke drum overhead entrains liquid droplets into the fractionation system, the differential pressure of the regeneration tower rises in step, the regeneration degree of the waste liquor falls at the same time, and the unit can only trade throughput for a temporary stability inside the towers.
For the coke drum overhead and waste liquor regeneration system of a refinery, Chemi Tech supplies the KM-6120 series of defoamers; the dosage is adjusted flexibly by the acid number of the feedstock oil, tower top temperature and the differential pressure of the regeneration tower. This grade is a silicone-free formulation that resists high temperature, acid and alkali; long-term dosing forms no silicone fouling on the trays and packing surfaces and does not aggravate the foaming tendency of the amine solution itself. The measured data of the liquid carryover in the overhead vapour and the differential pressure of the regeneration tower are checked side by side, and the fitted dosage of the KM-6120 series is given directly by these two sets of readings.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-6120 series defoamer is configured for the coke drum overhead and waste liquor regeneration system. It is silicone-free, so long-term dosing forms no silicone fouling on the trays or the packing surface of the regeneration tower; it resists high temperature and does not decompose or fail in the high-temperature overhead vapour; it resists acid and alkali, so its foam-suppressing ability does not decay as degradation products build up in the circulating amine solution; its compatibility is excellent and it does not aggravate the foaming tendency of the system when coexisting with lean and rich solutions; it breaks foam fast and the liquid carryover in the overhead vapour falls back noticeably; and the dosage is economical, rated by the acid number of the feedstock oil, so the defoaming cost of the unit can be accounted month by month.
Industry Pain Points and Solutions
The root of foaming in the coke drum lies mostly in the combined effect of surface-active species brought by a too-high acid number of the feedstock oil and vapour-liquid shear inside the tower, while the accumulation of degradation products in the waste liquor stabilises the foam on the trays, finally concentrating in two places: liquid carryover in the vapour and the differential pressure of the regeneration tower.
When the acid number of the feedstock oil is high, the foam in the overhead vapour-liquid separation space builds up first and the liquid level reading of the reflux drum reads falsely high. KM-6120 resists high temperature, acid and alkali; once the two readings of acid number and tower top temperature are cleared, its dosage is re-rated by the load inside the tower, and the level reading comes into line with the field gauge glass.
When the tower top temperature rises, the foam is entrained into the fractionation system by the high-temperature oil vapour and the differential pressure of the regeneration tower climbs in step. KM-6120 is silicone-free and resists high temperature; with the two sets of readings compared side by side, the tower top temperature falls from 115 °C to 108 °C, the differential pressure of the regeneration tower drops from 32 kPa to 21 kPa, and the regeneration degree of the lean solution returns to near the design value.
When degradation products accumulate, the foam on the trays keeps pushing the differential pressure up and the foaming tendency of the amine solution itself is amplified. The KM-6120 series adds no extra top-up frequency on this item; with the three readings of acid number, temperature and differential pressure brought together, the fitted dosage of that tower is settled and the coking unit executes at the rated grade.
Typical Operating Conditions and Verification
Customer case: the delayed coking unit of a local refinery in Shandong, applied to the defoaming stage of the coke drum overhead and the waste liquor regeneration system.
At that plant the liquid carryover at the coke drum overhead rebounded around the acceptance line again and again, the differential pressure setpoint of the regeneration tower had to be raised once every shift, and the regeneration degree of the lean solution kept falling. KM-6120 was selected for that tower, with the amount rated by the differential pressure of the regeneration tower and the concentration of the circulating amine solution. After the switch, the liquid carryover in the overhead vapour fell back noticeably; the differential pressure of the regeneration tower no longer climbed shift by shift; the regeneration degree of the lean solution returned to near the design value, and one less layer of deposit remained on the tray surfaces.
Frequently Asked Questions
Does dosing the KM-6120 series at the coke drum overhead over the long term affect the regeneration degree of the lean solution?
First check whether the amount of silicone introduced falls within the assessment range of that tower. The KM-6120 series is silicone-free, so long-term dosing forms no silicone fouling on the trays or the packing surface of the regeneration tower; the measured data of the liquid carryover and the regeneration degree of the lean solution are given by Chemi Tech after side-by-side comparison of the same unit, and within the rated dosage grade they do not interfere with the absorption and regeneration capacity of the amine solution itself. The actual dosage is referenced to the acid number of the feedstock oil and the tower top temperature of the shift; Chemi Tech brings the two sets of readings together to rate the fitted dosage of that tower.