Industrial units and several stacks arranged in groups in black-and-white tone

Once the rotary screen printing paste starts foaming, dense bubbles float on the paste surface, the paste supply inside the screen becomes intermittent, blurred edges and broken lines appear on the pattern, and the reject rate of the printed fabric climbs in step.

For the rotary screen printing paste system of textiles, Chemi Tech supplies the KM-331 series of defoamers; the dosage is adjusted flexibly by paste viscosity and screen speed. This grade disperses easily in the paste and breaks foam fast without affecting the tinting strength of the color paste or the color fastness of the fabric, and it leaves no bubble marks inside the screen. The measured results of the bubble density on the paste surface and the sharpness of the pattern edges are checked side by side, and the fitted dosage of the KM-331 series is made clear accordingly.

Advantages of Chemi Tech Defoamers

The Chemi Tech KM-331 series defoamer is configured for the rotary screen printing paste system. Its compatibility is excellent and it does not separate when coexisting with common color pastes and thickeners in the same paste; it breaks foam fast and the bubble density on the paste surface falls back noticeably; its foam-suppressing effect is long-lasting and needs no frequent top-up across long continuous printing shifts; it resists shear and does not fail in the high-shear zone of the squeegee; it has little effect on color fastness and blurred pattern edges basically no longer appear; and the dosage is economical, rated by paste viscosity and screen speed, so the defoaming cost per square metre of fabric can be accounted directly.

Industry Pain Points and Solutions

The root of foaming in rotary screen printing paste lies mostly in the combined effect of a too-high paste viscosity and squeegee shear, while the accumulation of thickeners and surface-active species stabilises the fine bubbles inside the screen, finally concentrating in two places: the bubble density on the paste surface and the pattern edges.

When the paste viscosity is high, the bubbles on the paste surface build up first and the paste carry of the squeegee fluctuates in step. KM-331 disperses easily in the paste; once the viscosity and the paste type are cleared, its dosage is re-rated by the paste state of that pattern, and the bubble density on the paste surface starts to fall back.

When the squeegee pressure is raised, the foam is sheared deep into the paste layer and the pattern edges blur in step. KM-331 resists shear; with the two sets of readings compared side by side, the screen speed rises from 45 metres per minute to 60, the bubble density on the paste surface drops from 28 bubbles per square decimetre to 9, and the sharpness of the pattern edges improves at the same time.

As the screen speed keeps rising, the difficulty of foam suppression goes up another notch and the top-up frequency follows. The KM-331 series adds no extra in-shift top-up on this item; once the two readings of viscosity and screen speed are checked through, the fitted dosage of that printing line is made clear and the printing workshop executes at that grade.

Typical Operating Conditions and Verification

Customer case: the rotary screen printing workshop of a printing enterprise in Zhejiang, applied to the defoaming stage of textile rotary screen printing paste.

At that plant a layer of fine bubbles floated on the paste surface of the rotary screen printing paste for a long time, the fabric with blurred pattern edges increased shift by shift, and the screen cleaning frequency rose noticeably. KM-331 was selected after comparison against paste viscosity, with the amount rated by screen speed and paste viscosity. After it was put into service, the bubble density on the paste surface fell back noticeably; blurred pattern edges basically no longer appeared; the screen cleaning frequency dropped from twice per shift to once per shift, and the reject rate of the printed fabric fell in step.

Frequently Asked Questions

Will the KM-331 series in rotary screen printing paste affect the color fastness of the fabric?

It depends on whether the compatibility of the defoamer with the color-paste system falls within the control range of that pattern. The KM-331 series does not separate when coexisting with common color pastes and thickeners in the same paste; the measured data of the bubble density and the color-fastness rating are given by Chemi Tech after side-by-side comparison of the same printing line, and within the rated dosage grade they do not interfere with the coloring and fixation of the color paste. The actual dosage is corrected by paste viscosity and screen speed; Chemi Tech gives the fitted dosage of that printing line from the pattern records.