Multi-colored fabric rolls stacked in rows along a rack

After the paper and paperboard have gone through surface sizing and drying, the spray rating and the water-repellency grade fall together, water stains seep along the fiber interstices into the inner layers of the board, and the scrap rate and rework rate of packaging paper climb at the same time.

Chemi Tech supplies the KMF-1901 series of water repellents for the surface water-repellency finishing of paper and paperboard; the dosage is adjusted flexibly by paper grammage and liquor pick-up. This grade forms a continuous film on the fiber surface, balancing the spray rating and the water-repellency grade at once; it withstands repeated water immersion, has little effect on hand feel, and is highly compatible in the same bath with common sizing agents and starch-based surface-treatment agents. The measured data of the spray rating and the water absorption are laid out on the same test record, and the fitted dosage of the KMF-1901 series is graded accordingly.

Advantages of Chemi Tech Water Repellents

The Chemi Tech KMF-1901 series water repellent is configured for the surface water-repellency finishing of paper and paperboard. It forms a continuous film on the fiber surface and balances the spray rating and the water-repellency grade at once; it withstands repeated immersion and the rating decay slows; it has little effect on hand feel and the board neither stiffens nor feels harsh; it is highly compatible in the same bath with common sizing agents and starch-based surface-treatment agents, so the finishing liquor needs no separate formulation; its curing-temperature window is wide and the existing drying conditions of the paper mill can be used directly; and the dosage is stepped up by paper grammage and liquor pick-up, so the cost per tonne of paper can be accounted batch by batch.

Industry Pain Points and Solutions

The root of water-repellency decay on the paper surface lies mostly in the combined effect of a too-low liquor pick-up and insufficient curing crosslinking, while the high temperature of the paper mill drying section weakens the integrity of the finishing film section by section, finally concentrating in two places: the spray rating and the water absorption of the board.

When the liquor pick-up is low, the film on the fiber surface is not continuous enough and the spray rating drops one notch right after the first immersion. KMF-1901 forms a continuous film; once the liquor pick-up and paper grammage are checked through, its dosage is re-rated by paper grade, and the spray rating stays at the acceptance grade.

When the curing temperature is set too low, crosslinking is insufficient, the water-repellency grade slips with every immersion cycle and spreading water stains are left on the face of the board. KMF-1901 performs stably on both coated paper and corrugated paper; with the two sets of readings compared side by side, the liquor pick-up rises from 65% to 78%, the water absorption of the board drops from 28 grams per square metre to 12, and the water stains no longer spread into the inner layers.

The high temperature of the drying section puts the durability of the finishing film through another test. The KMF-1901 series withstands repeated immersion and adds no extra finishing rounds on this item; once the grammage and liquor pick-up are checked through, the fitted dosage of that batch of board is made clear and the finishing workshop executes at that magnitude.

Typical Operating Conditions and Verification

Customer case: the surface-treatment workshop of a packaging-board enterprise in Henan, applied to the water-repellency finishing stage of paper and paperboard.

At that plant the spray rating on the board surface fell faster than on the paper after three immersion tests, the water stains on the face of the board spread into the inner layers, and the stacking strength of the cartons fell in step. KMF-1901 was taken as the water-repellent finishing grade for that batch of board, with the finishing-liquor concentration rated by liquor pick-up and curing temperature. Thereafter the water stains on the face of the board no longer spread inward; the spray rating and the water-repellency grade stayed at the acceptance grade after multiple immersion tests; the rating decay of the paper and the board converged; the number of scrapped batches fell back and the finishing rounds decreased.

Frequently Asked Questions

After multiple immersion cycles, can the rating decay of the board be predicted with a water repellent?

It is governed by three clues: the number of immersion cycles, the temperature of the drying section and the pH of the surface-treatment agent. The KMF-1901 series forms a continuous film on the fiber surface and withstands repeated immersion; the measured data of the spray rating and the water absorption are checked out by Chemi Tech from the wash records of the same paper grade, the decay trend can be plotted as a curve against the number of cycles, and the specific values are subject to the actual conditions of that paper mill. The actual dosage is fine-tuned by paper grammage and liquor pick-up; Chemi Tech determines the fitted dosage from bench samples and on-site measurements.