The roofs and chimneys of red-brick factory buildings merging into one stretch beneath the clouds
Once the sugar juice foams under heat in the clarification and filtration sections, the mud-juice interface in the settling tank blurs as the foam rises, the filter-cloth pressure differential of the filter climbs in step, the turbidity of the clarified juice and the sucrose recovery rate fall together, and the refining tempo of the shift is held up at this single step, the foam.
Chemi Tech supplies the KM-751 series of defoamers for the clarification and filtration sections of sugar production; the dosage is adjusted flexibly by sugar-juice concentration and material temperature. This grade has excellent compatibility: it floats on the juice surface and breaks foam without introducing impurities, and it does not change the original pace of flocculation and settling. The measured readings of clarified-juice turbidity and filter-cloth pressure differential are tabulated side by side, and the precise dosage of each section can be read off section by section.
Advantages of Chemi Tech Defoamers
The Chemi Tech KM-751 series defoamer is configured for the clarification and filtration sections of sugar production. Its compatibility is excellent: it floats on the juice surface and breaks foam without introducing impurities; it resists high temperature and does not decompose or fail in the hot juice of clarification and evaporation; it does not affect clarification, and the pace of flocculation and settling is unchanged by dosing; it breaks foam fast, and the foam layer on the settling tank falls back rapidly; its foam-suppressing duration is long-lasting, noticeably reducing the number of make-up doses over a shift; and the dosage is economical, rated by material temperature and process stage, with the chemical expenditure per tonne of sugar itemised by section for clear accounting.
Industry Pain Points and Solutions
The root of foaming in the clarification and filtration sections lies mostly in the combined effect of a relatively high sugar-juice concentration and heated shear, while the surface-active substances in the diffusion and evaporation stages further stabilise the microfoam on the settling-tank surface, finally concentrating in two places: the blurred settling interface and the rising filter-cloth pressure differential.
Once the sugar-juice concentration is raised, the foam lifts the mud-juice interface into a blurred band and the turbidity of the clarified juice rises in step. KM-751 has excellent compatibility; once the two readings of juice concentration and material temperature are cleared, the dosage is re-rated by the load of the section, and the settling interface becomes clear again.
After the material temperature is turned up, the foam is broken up and recombined by thermal shear, an adhering layer forms on the filter-cloth surface, and the pressure differential rises in step. KM-751 resists high temperature; with the two sets of readings of clarified-juice turbidity and filter-cloth pressure differential checked side by side, the dosage is rated to the fitted grade of that section, and the filtration cycle returns to its set value.
When the process stage switches to evaporation, the sugar-juice viscosity rises another notch and the foam becomes harder to break. This grade has a long-lasting foam-suppressing effect and adds no extra make-up frequency on this item; with concentration, temperature and stage all checked through, the precise dosage of that section is set, and the sugar workshop executes by section.
Typical Operating Conditions and Verification
Customer case: the clarification and filtration workshop of a sugar enterprise in Guangxi, applied to the juice clarification-settling and pressure-filtration stages.
A layer of fine foam floated on the settling-tank surface of this plant year-round, the turbidity of the clarified juice oscillated around the pass line, and the filter-cloth pressure-differential setting of the filter press had to be raised once every shift. KM-751 was selected for the plant, with the dosage rated in grades by material temperature and process stage. Measured records after the switch show: the settling interface turned from blurred to clear, and the turbidity of the clarified juice fell from 120 to 45; the filter-press cycle shortened from 100 minutes per round to 75 minutes, the frequency of removing and washing the filter cloth fell accordingly, and the sucrose recovery rate returned to near its design value.
Frequently Asked Questions
When used in the sugar clarification stage, will KM-751 throw the clarifying effect of the juice off course?
The two sets of readings, the settling interface and the filter-cloth pressure differential, must be compared together. The KM-751 series has excellent compatibility, floating on the juice surface to break foam without introducing impurities; the measured data of clarified-juice turbidity and filtration cycle are checked out by Chemi Tech against the same clarification section, and dosing at the rated dosage does not disturb the pace of flocculation and settling. The actual dosage is corrected by sugar-juice concentration and process stage; Chemi Tech gives the fitted dosage from measurements of the filtration section.